630581

Akai DPS24 MK II Manual

46
Zoom out
Zoom in
Previous page
1/252
Next page
User Guide
34
MAIN CONTROL SECTION
AUTO Activates the AUTO record function. When AUTO is switched on, moni-
toring switches from disk to input at the IN time on the selected track(s)
and switches back to disk playback at the OUT point. Thus you can
rehearse the recording simply by switching AUTO on.
By pressing RECORD and PLAY before the IN point, however, the project
will play up to the IN point monitoring off disk, will switch to input
and drop into record at the IN point up until the OUT point where it
will drop out of record and switch back to monitoring off disk.
Used in conjunction with the PRE/POST-ROLL function and CYCLE,
you can cycle round the IN/OUT points with the PRE-POST-ROLL off-
sets to repeatedly rehearse a take - when you ready, press
PLAY+RECORD (or the footswitch) to commit the recording.
For example, if the IN time is set to 00:01:00:00 and the OUT time is set
to 00:01:20:00, with PRE-ROLL and POST ROLL set to 5 seconds each,
with CYCLE switched on, the DPS24 will play around 00:00:55:00 to
00:01:25:00 switching monitoring/punching in/out at 00:00:01:00 and
00:01:20:00 respectively.
To hear the recording, you should switch AUTO off.
INP MON Switches selected inputs to monitor. When INPUT MONITOR is
switched off (the default), monitoring is as follows on the selected
RECORD tracks:
PLAYBACK Monitor disk
RECORD Monitor input
STOP Monitor input
Thus, when playing up to a record punch-in (manual or automatic),
you hear the track(s) selected for record playing back. At the point of
the punch-in, monitoring switches to INPUT and you will hear what
you are playing/recording. At the point of punch-out, monitoring re-
verts to disk playback. When playback is stopped, you hear the inputs.
When Jog/Shuttle mode is active (green PLAY LED lit), the DPS24 is in
Playback mode, therefore monitor is on disk tracks, not inputs.
When INPUT MONITOR is switched on, you hear the inputs through
the tracks selected for record at all times (i.e. during playback, record-
ing and when the DPS24 is stopped).
WHEEL Turns the JOG/SHUTTLE wheel on or off.
CANCEL Cancels/aborts prompt driven actions (for example, editing, deleting,
naming, scene recall, autolocate recall, etc.).
ENTER Proceeds with any prompt driven actions about to take place (for ex-
ample, editing, deleting, naming, scene recall, autolocate recall, etc.).
NOTE:
Cancel and Execute are also shown on the LCD in such circumstances. The dedicated keys are
provided for convenience when using functions such as scene and/or autolocate recall, etc., where it may not
be convenient to reach up to the LCD..
In most LCD pages, CANCEL duplicates as F1 (EXIT/CANCEL) and ENTER as F6 (OK, PROCEED, ...).
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DPS24 MK II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DPS24 MK II in the language / languages: English as an attachment in your email.

The manual is 10,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info