630581

Akai DPS24 MK II Manual

31
Zoom out
Zoom in
Previous page
1/252
Next page
User Guide
19
The different channels are selected using the FADER BANK keys located above the trans-
port keys. The types of mixer channel types are as follows:
INPUTS 12 general purpose mixer channels which can be used to mix the
DPS24's various input sources. The channels can also be used to add
EQ and dynamics and also to send the channels to either the internal
effects and/or the AUX bus. By default, input sources are ADCs 1-12.
TRACKS 24 mixer channels which are sourced from the internal disk recorder.
The channels can also be used to add EQ and dynamics and also to
send the channels to either the internal effects and/or the AUX bus.
GROUP
8 channels providing control of the 8 group bus master levels. Pan, EQ,
dynamics and FX/AUX sends are not available on these channels.
FX RETURN
By default, these 4 stereo channels provide control the stereo returns of
the internal effects with balance control and FX/Aux sends. However,
these channels can be re-patched to mix any of the DPS24 input sources.
FX SEND 4 channels providing control of the 4 fx bus master send levels.
AUX SEND 4 channels providing control of the 4 aux bus master send levels.
AUX IN A stereo auxiliary mixer channel allowing the AUX L/R inputs to be
mixed to the main L/R bus with level and mute control only. This
channel has a fixed source.
MIDI CONTROLLER 16 channels each providing 2 MIDI controllers which can be assigned
to any MIDI channel or controller. Controller #1 is controlled by the
channel fader and Controller #2 is controlled by the channel's PAN
control. By default, these are configured to send MIDI Volume (CC#7)
on Controller #1 and MIDI Pan (CC#10) on Contr oller #2.
There are 4 fixed Fader Banks and 5 assignable User Banks arranged as follows :
INP 1-12 These channels control Inputs1-12.
TRACKS 1-12 These channels control Tracks 1-12.
TRACKS 13-24 These channels control Tracks 13-24.
GROUP/FX Channels 1-8 control the Group Output levels, and Channels 9-12
control the stereo FX return channels (default to internal FX returns)
USER BANK Selects the first bank of user assignable channels. By default, they are
assigned as follows:
- Channels 1-4 control the master send levels to the FX buss.
- Channels 5-8 control the master send levels to the AUX buss.
- Channel 9 controls the stereo AUX IN.
- Channels 10-12 control MIDI controllers1-3
SHIFT + INP 1-12 Ext User-Bank 1 (no default assignment)
SHIFT + TRACKS 1-12 Ext User-Bank 2 (no default assignment)
SHIFT + TRACKS 13-24 Ext User-Bank 3 (no default assignment)
SHIFT + GROUP/FX Ext User-Bank 4 (no default assignment)
The User Banks configurations are assigned in the SETUP mode.
FADERS / FADER BANKS
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DPS24 MK II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DPS24 MK II in the language / languages: English as an attachment in your email.

The manual is 10,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info