630575
37
Zoom out
Zoom in
Previous page
1/230
Next page
25
v1.6 Operator’s Manual
SAVE INDICATOR
Whenever something is changed in a project, it is autosaved.
When this happens, a small "warning" icon appears in the FREE box at the top right of the
display:
IMPORTANT NOTE:
When this icon appears, it is essential that you do not switch the DPS24 off.
Doing so might result in lost data and maybe irreparable damage to your disk drive.
After making any changes to your project, always wait until the icon shown above clears
before switching off.
If you turn off the power while saving project data onto hard drive, the project data may be
damaged.
As a safety, the DPS24 automatically creates a hidden backup project (a copy of the current
project) while saving project data .
In case the original project data gets corrupted, the DPS24 will boot up with the back up
project instead.
When the DPS24 boots up with the backup project, something similar to the following mes-
sage will be displayed as a reminder:
However, please keep in mind that it is still possible to damage project data if you power-off
the DPS24 while writing to the disk.
The DPS24 is writing to the disk after any recording, editing or mixing operation (as simple
as touching a fader), or after changing any setting.
It usually takes only 10-20 seconds to complete a write operation of the last changes.
Please wait until the icon disappears to power-down the unit.
If the last used Project gets corrupted and the DPS24 is not able to recover the damaged However,
you can bypass auto-loading the last project on power-up by using the following procedure:
* power-off
* turn the shuttle wheel (outer ring) counterclockwise to 11 o'clock (the little notch pointing
towards the IN key)
*
power-up while holding the shuttle wheel in this position until the DPS24 finishes booting up.
This will not load the last Project, but create a dummy empty project instead.
From there, you should be able to load other Projects.
You should also be able to recover the audio from the corrupted project using the Audio
Recovery feature described later in this manual.
SAVE INDICATOR
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai DPS24 - V1.6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai DPS24 - V1.6 in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai DPS24 - V1.6

Akai DPS24 - V1.6 Additional guide - English - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info