Manual Akai AL3214SMART (page 6 of 15) (English)

612870

Zoom out

Zoom in

1/15

English - 36 -

Media Browser Menu

You can play photo, music and movie les stored

on a USB disk by connecting it to your TV. Connect

a USB disk to one of the USB inputs located on the

side of the TV. Pressing the Menu button while in the

Media Browser mode will access the Picture, Sound

and Settings menu options. Pressing the Menu button

again will exit from this screen.

You can set your Media

Browser preferences by using the Settings menu.

Loop/Shufe Mode Operation

Start playback with the Play

button and activate

TVplaysnextleandloop

the list.

Start playback with

OK and

activate

Thesamelewillbe

played in a loop (repeat).

Start playback with

OK/Play

button

and activate

Thelewillbeplayedina

shufe.

Quick Menu

The Quick Settings menu allows you to access some

options quickly. This menu includes Power Save Mode,

Picture Mode, Equalizer Settings, Favourites, Sleep

Timer, FollowMe TV, FollowMe TV to DMR, CEC RC

Passthrough and Information booklet options. Press

Quick Menu button on the remote control to view the

quick menu. See the following chapters for details of

the listed features.

FollowMe TV (optional)

With your mobile device you can stream the current

broadcast from your smart TV using the FollowMe

TV feature. Install the appropriate Smart Center

application to your mobile device. Start the application.

For further information on using this feature refer to

the instructions of the application you use.

Note: This application is not compatible with all mobile device.

FollowMe TV to DMR (optional)

This feature allows video streaming from your TV

to another TV or mobile devices, using proper

applications (e.g. UPnP - Universal Plug and Play -

applications like BubbleUPnP). Activate FollowMe TV

to DMR and timeshifting starts. Press the red button

and device selection menu will be displayed. Choose

your device and press OK.

Note: FollowMeTV and FollowMe TV to DMR features

work correlated wth the PVR feature and requres a

connected USB storage devce wth FAT32 format and

enough space n t. HD channels are not supported and

both of the devces must be connected to the same

network.

E-Manual

You can nd instructions for your TV’s features in

the E-Manual.

To use E-Manual, press to the Info button while main

menu is displayed on the screen.

By using the navigation buttons select a desired

category. Every category includes a different topics.

Select a topic and press OK to read instructions.

To close the E-Manual screen press the Exit button.

Note: The contents of the E-Manual may vary according to the

model.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the Other Settings menu under

Settings menu should be set as Enabled at rst.

Press the Source button and select the HDMI input

of the connected CEC device from the Source List

menu. When new CEC source device is connected,

it will be listed in source menu with its own name

instead of the connected HDMI ports name(DVD

Player, Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected.

To terminate this operation and control the TV

via the remote again, press and hold the “0-Zero”

button on the remote control for 3 seconds. Or press

Q.Menu button on the remote, highlight the CEC

RC Passthrough and set as Off by pressing Left

or Right button. This feature can also be enabled or

disabled under the Settings/Other Settings menu.

The TV supports also ARC(Audio Return Channel)

feature. This feature is an audio link meant to replace

other cables between the TV and the audio system

(A/V receiver or speaker system).

When ARC is active, TV does not mute its other audio

outputs automatically. So you need to decrease TV

volume to zero manually, if you want to hear audio

from connected audio device only (same as other

optical or co-axial digital audio outputs). If you want

to change connected device’s volume level, you

should select that device from the source list. In that

case volume control keys are directed to connected

audio device.

English - 37 -

TV Menu Features and Functions

Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture mode can

be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.

Contrast

Adjusts the light and dark values on the screen.

Brightness

Adjusts the brightness values on the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colors.

Power Save Mode

For setting the Power Save Mode to Eco, Picture Off or Disabled.

(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)

Backlight (Optional)

This setting controls the backlight level. The backlight function will be inactive if the Power

Save Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or

while the picture mode is set to Game.

Noise Reduction

If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting to

reduce the amount of noise.

Advanced Settings

Dynamic Contrast

You can change the Dynamic Contrast ratio to desired value.

Colour Temp

Sets the desired colour tone.

Picture Zoom

Sets the desired picture size from picture zoom menu.

Note: Auto option is only available in Scart mode with SCART PIN8 high voltage/low voltage switching.

Film Mode

Films are recorded at a different number of frames per second to normal television programmes.

Turn this feature on when you are watching lms to see the fast motion scenes clearly.

Skin Tone

Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

RGB Gain

You can congure the colour temperature values using the RGB Gain feature.

HDMI True Black

While watching from a HDMI source, this feature will be visible in the Picture Settings menu.

You can use this feature to enhance blackness in the picture.

PC Position

Appears only when the input source is set to VGA/PC.

Autoposition

Automatically optimizes the display. Press OK to optimize.

H Position

This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive

presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase

Depending on the input source(computer etc.) you may see a hazy or noisy picture on the

screen. You can use phase to get a clearer picture by trial and error.

Reset

Resets the picture settings to factory default settings (except Game Mode).

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the

Picture Settings while in PC mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Akai AL3214SMART in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai AL3214SMART

Akai AL3214SMART User Manual - German - 16 pages

Akai AL3214SMART User Manual - Dutch - 15 pages

Akai AL3214SMART User Manual - French - 16 pages

Akai AL3214SMART User Manual - Spanish - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Akai AL3214SMART Manual

Product: