Installation3.
This unit can be installed in any dashboard having an opening as shown in
the picture. The dashboard should be 4.75 - 5.56 mm thick in order to be
able to support the unit. The unit should be installed horizontally in an angle
less than 20°.
i
First complete the electrical connections, and then check them for
correctness.
● Remove the outer edge from the unit.
● Remove the detachable control panel.
● Insert the release keys to separate the unit from
the mounting bracket. Keep the release keys in
a safe place for future use.
● If necessary, attach the support strap to the car
body using the tapping screw.
● Insert the mounting bracket into the dashboard,
and bend the mounting tabs out with a
screwdriver.
● Secure the rear of the unit to the support strap,
using the bolts, nuts, and washers provided.
● Connect the appliance to the electrical circuit.
Read the paragraph "ISO Cable Connection".
● Connect the random equipment to the
appliance. Read the paragraph "Connecting
random equipment".
● Push the main unit into the mounting bracket
until you hear a click.
● Press the RESET button.
● Attach the control panel. Read the paragraph
"Detachable control panel" in the chapter
"Operation".
