29787
17
Zoom out
Zoom in
Previous page
1/64
Next page
3
1
1,2,3,4
The unit can be turned on at a specified time every day with the
built-in timer.
Preparation
Make sure the clock is set correctly. (See page 15).
1
2
3
Fkess TIMER once to display “0”, then press
ENTER within 6 seconds.
“’~”
is displayed and the time flashes.
G
[m
1{you press ENTER after 6 seconds, another operation may
start.
Designate the tinner-on time by turning VOLUME/
MULTI JOG or press 4+ or b-, then press
ENTER.
10 change the timer-on time by 30 minutes, press and hold
down + or >.
After you designate the timer-on time, one of the source names
flashes on the display.
F%ess any of the function buttons (TAPE, TUNER,
AUX, CD) or turn VOLUME/MIJLTl JOG or press
*H or - to
select a source, then press ENTER.
The duration for the timer activated period flashes.
4
5
6
Select the duration for the timer-activated period f
with VOLUME/MULTl JOG or press + or Et- E,
then press ENTER.
$1%
The duration for the timer-activated period can be set between !~~”~~
5 and 240 minutes in 5-minute steps.
H
,,, .,,
,,!8
~,:x:ii
.,. ,:..:
Prepare the source.
?“,,,.
8
“, ,?
To listen to a CD, load the disc.
,“
To listen to a tape, insert the tape into deck.
~
To listen to the radio, tune in to a station.
o
To listen to the equipment connected to VIDEO/AUX iackg
set the timer of the connected source (with an external timer)
and prepare for the play.
Press POWERK!I STANDBY/ON to turn the unit
off after adjusting the volume and tone.
When the timer-on time is reached, the unit turns on and
begins play with the selected source.
The volume level is automatically set to 20 when the power is
turned off with the volume level set to 2“1or more.
To check the specified time and source
Press TIMER, The timer-on time, the selected source name and
the duration for the timer-activated period flash alternately for 6
seconds.
To
cancel timer standby mode temporarily
Press TIMER repeatedly until “@”or ‘LOREC” disappears on the
display.
To restore the timer standby mode, press TIMER once or twice
to display “@”or “0
REC”.
Using the unit while the timer is set
You can use the unit normally after setting the timer.
Before turning off the power, carry out step 5 to prepare the
source, and adjust the volume and tone.
m
. Timer playback and timer recording will not begin unless the
power is turned off.
* Connected equipment cannot be turned on and off by the built-
in timer of this unit. Use an external timer.
... ,..,..,,
.“,””.,.,”“,.”.,””.”,..,,
...”“..”“,,-.”,‘,,,!”,%.,,,J,,”b.,,,’”.’,.!,,.,...,,,,......,,....., , ...!..%%
i_IMER REiORDING
Timer recording is applicable for TUNER and AUX/VIDEO (with
an external timer) sources only.
FWSS TIMER repeatedly Until “O REG” appearsontile display,
then press ENTER within 6 seconds.
Carry out the steps of “SETTING THE TIMER from step 2 and
insert the tape to be recorded on into deck after step 5.
If TUNER is pressed, the band cannot be selected in
step.
this
ENGLISH 16
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa XRM33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa XRM33 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info