29787
13
Zoom out
Zoom in
Previous page
1/64
Next page
Sound adjustment during recording
The output volume and tone of the speakers or headphones may
,;g’;
be freely varied without affecting the recording.
;g;$,
This section explains how to record from the tuner, CD player,
or ,external equipment.
Preparation
Use Type I (normal) tapes only.
MODE
FUNCTION
II
Set the tape to the point where recording will start.
1
2
3
4
Insert the tape to be recorded on into deck.
Insert the tape with the side to be recorded on first facing out
from the unit and the exposed side down.
Press TAPE/RE’V MODE to select the reverse
mode.
‘To record on one side only, select Z
‘To record on both sides, select =] or C=).
Press function (TUNER, AUXAflDEO or CD) and
Iprepare the source to be recorded.
To record from a CID, press CD andl load the disc.
To record from a radio broadcasl, press TUNEWBAND
{andtune in to a station.
?o record from a connected source, press AUXAflDEO and
Iplay.
Press
REC/REC MUTE to start recording.
When the selected function is CD, playback and recording
start simultaneously.
m
To stop recording, press .
To pause recording, press II (applicable when the source is
TUINER or ALDVVIDEO). To resume recording, press it again.
Insertion of 4-second blank spaces may help you to locate Ithe
beginning of the track on other equipments. This unit can add
blank spaces only when the source is TUNER or AUX/VIDEO.
1 Press REC/REC MUTE during recording or while in
recording pause mode.
~ on the display flashes for 4 seconds and the tape runs
without recording. After 4 seconds, the deck enters the
recording pause mode,
2 Press II to resume recording.
To insert a blank soace of less than 4 seconds, press
REC/REC MUTE again while ~ is flashing.
To insert blank s~aces of more than 4 seconds, alter the deck
enters the recording pause mode, press
REC/iREC MUTE
again.
Each time OREC/REC MUTE is pressed, a 4-second blank
space is added.
‘This unit does not have the function to locate the beginning of track.
m
Recording cannot be done when TAPE function is selected.
To erase a recording
1 Insert the tape to be erased into the deck.
2 Set the tape to the point where the erasure is to be started.
3 Set the reverse mode by pressing TAPE/REV MODE.
4 Press AUWVIDEO and turn the connected equipment off.
5 Press
REC/REC MUTE to start the erasure.
ENGLISH 12
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa XRM33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa XRM33 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info