48841

Aiwa XR-MR5 Manual

24
Zoom out
Zoom in
Previous page
1/98
Next page
24
ENGLISH
ERASING RECORDINGS
ON A CD-RW
You can erase recordings on a CD-RW in the following three ways:
(All these ways are applicable only to a CD-RW. Recordings on a
CD-R cannot be erased in any way.)
All tracks erasing erases all tracks on a CD-RW at one time.
Last track erasing erases only the last track on a CD-RW.
Unfinalization erases the Table Of Contents (TOC) on a finalized
CD-RW.
Through the erasing process, you can restore a CD-RW damaged
by unsuccessful recording or finalizing due to a power interruption
during the process.
NOTE
• Never turn the unit off by pressing POWER or disconnecting
the AC cord during the erasing process.
If the unit is turned off even by accident or power failure damages
the disc and it may no longer be restored.
• During the erasing process, all the buttons (except POWER)
are inoperative.
ERASING ALL TRACKS
All tracks erasing erases all tracks on a CD-RW at one time and it
erases the Table Of Contents (TOC) on a CD-RW as well, if the
CD-RW has been finalized.
After erasing, the CD-RW cannot be played on the CD player of
this unit or any other conventional CD players.
CD-R/RW
ENTER
ERASE MODE
CD-R/RW
s
s
ERASE MODE
zCD-R/RW
OPEN/CLOSE
ENTER/
ILLUMINATION
1
Load a CD-RW in the CD-R/CD-RW player/recorder.
Load the disc with the label side up. To open or close the disc
tray, press z CD-R/RW OPEN/CLOSE.
2
Press CD-R/RW.
Wait until the unit finishes reading the loaded disc. (Make sure
the "CD-RW" indicator lights up.)
3
In stop mode, press ERASE MODE repeatedly until
"Erase All?" is displayed.
4
Within 10 seconds, press ENTER/ILLUMINATION.
Alternatively, press ENTER on the remote control.
"Erase?All?" is displayed.
If you erase all the tracks, you cannot retrieve them again.
Make sure it is all right to erase all the tracks.
To cancel, press s.
5
Within 1 minute, press ENTER/ILLUMINATION
again.
Alternatively, press ENTER on the remote control.
"ERASE" appears on the display, the approximate erasing time
is displayed and counts down.
When erasing is completed, "Blank Disc" is displayed.
ERASING THE LAST TRACK
Last track erasing erases only the last track on a CD-RW.
To erase the last track on a finalized CD-RW disc, unfinalize the
disc first. You cannot erase the last track unless you unfinalize
the disc.
After erasing, the CD-RW cannot be played on the CD player of
this unit or any other conventional CD players. To do so, finalize
the CD-RW.
CD-R/RW
ENTER
ERASE MODE
CD-R/RW
s
s
ERASE MODE
zCD-R/RW
OPEN/CLOSE
ENTER/
ILLUMINATION
1
Load a CD-RW in the CD-R/CD-RW player/recorder.
Load the disc with the label side up. To open or close the disc
tray, press z CD-R/RW OPEN/CLOSE.
2
Press CD-R/RW.
Wait until the unit finishes reading the loaded disc. (Make
sure the "CD-RW" indicator lights up.)
3
In stop mode, press ERASE MODE repeatedly until
"Erase ?" is displayed.
Example: when the 12th track is the last track
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa XR-MR5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa XR-MR5 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info