Manual Aiwa XR-MD90 (page 7 of 104) (English, French, Spanish)

496636

Zoom out

Zoom in

1/104

WING THE REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and

insert two R03 (size AAA) batteries.

~.--’”

.;’O:l

4!l/

qo@

>+/

Q ‘“”’’’””

R03 (AAA)

When to replace the batteries

The maximum operational distance between the remote control

and the sensor on the CD player/MD recorder unit should be

approximately 5 meters (16 feet), When this distance decreases,

replace the batteries with new ones.

Opening and closing the top cover

When to use the remote control

Some operations can be performed using the buttons on the

remote control only, while others can be performed using the

buttons on the two main units as well as on the remote control.

This ‘instructionsmanual clearly describes the buttonsavailable

for each operation.

If the unit is not going to be used for an extended period of

time, remove the batteries to prevent possible electrolyte

leakage.

. The remote control may not operate correctly when:

The line of sight between the remote control and the remote

sensor (see the illustration on the previous page) is exposed

to intense light, such as direct sunlight.

- Other remote controls are used nearby (television, etc.)

SHIFT

To use the SHIFT button

Buttons @ have two different functions. One of the functions is

indicated on the button, and the other on the plate above the

buttcm.

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the

buttcm while pressing the SHIFT button.

SETTING THE CLOCK

POWER

Press the POWER button to turn on the power.

Press the CLOCK button while pressing the

SHIFT button on the remote control.

Within 4 seconds, press the 11 button.

The hour flashes.

To restore the 12-hour standard, press the

■ button again.

Press the ++ or >F button to designate the

hour.

Press the II button to set the hour,

The hour stops flashing and the minute starts flashing.

Press the ++ or - button to designate the

minute.

Press the II button to set the minute and

complete the setting.

The minute stops flashing on the display and the clock starts

from 00 seconds.

display the current time

Press the CLOCK button while pressing the SHIFT button on

the remote control. The time is displayed for 4 seconds.

However, the time cannot be displayed during recording.

If the clock display flashes while the power is off

This is caused

by a power interruption. The current time needs

to be reset.

If power is interrupted for more than approximately 12 hours, all

settings stored in memory after purchase need to be reset.

ENGLISH 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa XR-MD90 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 14,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa XR-MD90 Manual

Product: