48818

Aiwa XR-EM200 Manual

13
Zoom out
Zoom in
Previous page
1/19
Next page
13
To record radio programs and
external equipment
Use only type I (normal) tapes.
1
Press zPUSH EJECT to open the cassette holder.
2
Insert the recordable tape.
3
Prepare the source.
To record radio programs, press TUNER/BAND and tune
in the desired station.
To record from connected external equipment, press AUX
and prepare the equipment.
4
Press REC START/PAUSE twice to start recording.
When recording input from connected equipment,
manually start playback of the source.
To stop recording
Press s.
To pause recording (only for TUNER or AUX source)
Press REC START/PAUSE. Press again to resume.
To record a 4-second blank space (only for TUNER
or AUX source)
Inserting 4-second blank spaces may help you locate the
beginning of the track on other equipment with the "Music
Sensor" function.
1Press cTAPE (REC MUTING) on the unit during recording
or in recording pause mode.
"MUTING" flashes in the display for 4 seconds (a blank
space is added) and then the unit enters recording pause
mode.
2Press REC START/PAUSE to resume recording.
To record a blank space shorter than 4 seconds, press again
while "MUTING" flashes.
To record a blank space longer than 4 seconds, press again
after the unit enters recording pause mode.
Each time the button is pressed, a 4-second blank space is
added.
To erase a tape
1 Insert the tape. Set the tape to the desired point if needed.
2 Press AUX.
If optional equipment is connected to the AUX IN jacks, turn
it off.
3Press REC START/PAUSE twice.
To prevent accidental erasure
Remove the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.
To record a CD
Use only type I (normal) tapes.
1
Press zPUSH EJECT to open the cassette holder.
2
Insert the recordable tape.
Insert with the exposed side down, and the side to be
recorded on first facing out from the unit. Press zPUSH
EJECT to close the cassette holder.
3
Press FUNCTION on the remote repeatedly to
select the CD function, and load the disc.
To record only one track, start play of the track.
4
Press SYNCHRO REC.
The unit enters the recording pause mode, and "REC"
indicator flashes on the display.
5
Press REC START /PAUSE to start recording.
"MUTING" flashes in the display for 10 seconds and
recording starts.
When only a track is to be recorded, CD playing returns
to the beginning of the current track and recording starts.
•Volume or tone adjustment(s) does not affect recording.
•"NO TAB" is displayed if you attempt to record a tape
with the tab broken off.
•Only one side of the tape can be recorded at a time.
To record a selected set of tracks from a CD
Program the desired tracks (see "Programmed play" on page
9) and then press SYNCHRO REC.
TAPE RECORDING
Side A
Tab for side A
… 13 …


Need help? Post your question in this forum.

Forumrules
1

Forum

aiwa-xr-em200

Reset search

  • Dobrý den , kde nájdem manuál v slovencine , resp. v ceštine Submitted on 26-4-2023 at 17:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa XR-EM200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa XR-EM200 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info