Manual Aiwa XR-EM20 (page 17 of 20) (English, French, Spanish)

496634

Zoom out

Zoom in

1/20

Timer recording

Timer recording is available only for TUNER and AUX (with an

external timer) sources.

Hold down SHIFT and press TIMER on the remote

control repeatedly so that "5 REC" is displayed.

Within 6 seconds, press SET.

Press f or g to set the timer-on time, and

press SET.

Each press changes the time in 1-minute steps.

Holding these buttons down will vary the time in 10-minute

units.

Press f or g to select the source, and press

SET.

•For timer recording of a radio broadcast, select "TU ".

You will select the band later in step 7.

•For timer recording of the equipment connected to the

AUX IN jacks, select "AUX ".

Press f or g to set the timer-activated

duration, then press SET.

With each press, the timer-activated duration changes in

5-minute steps between 5 to 240 minutes.

Press f or g to adjust the volume for timer

recording, and press SET.

The volume level can be adjusted from 0 to 16.

Prepare the source.

To record the radio, select the band and tune in the desired

station.

To record external equipment connected to the AUX IN

jacks, set an external timer for the equipment so that its

playback begins at the same time.

Insert the recording tape and then turn the unit

off.

"5 REC " remains on the display to indicate the timer

standby mode.

At timer-on time, the unit turns on and records the selected

source. After the specified timer-activated duration, the

unit turns off again.

•To stop timer setting in steps 3 to 6, press s .

Timer standby mode is also canceled.

•Connected equipment cannot be turned on or off by the built-

in timer of this unit. Use an external timer.

When setting the timer on the unit

Hold down s and press f in stop mode.

Repeat the above to select timer playback, timer recording or

timer off mode, and use TONE instead of SET on the remote

control in the following steps.

To check the timer setting

Hold down SHIFT and press TIMER on the remote control

repeatedly so that "5 PLA Y" or "5 REC " appears on the

display.

The timer-on time, the source and the timer-activated duration

are displayed for 6 seconds.

To change the timer setting

Reset the timer again.

To cancel the timer

Hold down SHIFT and press TIMER on the remote control

repeatedly until "5 OFF " is displayed. "5 " or

"5 REC" disappears from the display.

Tip:

Your timer setting is retained even if the timer is canceled.

Next time the timer is activated, you can change your previous

setting, or simply use the same setting again.

I’m trying to change the language from Spanish to English Submitted on 19-3-2022 at 22:44
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa XR-EM20 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa XR-EM20 Manual

Product: