496634

Aiwa XR-EM20 Manual

13
Zoom out
Zoom in
Previous page
1/20
Next page
13
En
To start CD recording more easily
Insert the tape to be recorded, load the disc, and press
SYNCHRO REC. Regardless of the function currently selected,
CD play and tape recording start simultaneously.
•In CD stop mode, tape recording starts from the beginning
of the disc (all tracks recording).
When CD playback stops, tape recording stops
simultaneously.
•In CD playback mode, the unit returns to the beginning of
the current track and it records only that track (one track
recording).
The unit continues playback till the end of the disc. To stop
playback, press s.
To stop recording
Press s.
To pause recording (only for TUNER or AUX source)
Press REC/REC PAUSE. Press again to resume.
To record a selected set of tracks from a CD
Program the desired tracks (see "Programmed play" on page
9) and then press SYNCHRO REC.
To record a 4-second blank space (only for TUNER
or AUX source)
Inserting 4-second blank spaces may help you locate the
beginning of the track on other equipment with the "Music
Sensor" function.
1 Press c during recording or in recording pause mode.
"REC MUTE " flashes on the display for 4 seconds (a
blank space is added) and then the unit enters recording
pause mode.
2Press REC/REC PAUSE to resume recording.
•REC MUTE on the remote control is also available to add a
blank space in step 1.
To record a blank space shorter than 4 seconds, press again
while "REC MUTE " flashes.
To record a blank space longer than 4 seconds, press again
after the unit enters recording pause mode.
Each time the button is pressed, a 4-second blank space is
added.
To erase a tape
1 Insert the tape. Set the tape to the desired point if needed.
2 Select the AUX function.
If optional equipment is connected to the AUX IN jacks, turn
it off.
3Press REC/REC PAUSE twice.
Basic recording
Use only type I (normal) tapes.
1
Press zPUSH EJECT to open the cassette holder.
2
Insert the recording tape.
Insert with the exposed side down, and the side to be
recorded on facing out from the unit. Press zPUSH
EJECT to close the cassette holder.
3
Press FUNCTION on the remote control to select
the source to be recorded.
4
Prepare the source.
To record CD, load a disc.
To record a radio broadcast, tune in the desired station.
To record from connected external equipment, prepare the
equipment.
5
Press REC/REC PAUSE twice to start recording.
When recording a CD, CD playback starts automatically.
When recording input from connected equipment,
manually start playback of the source.
On the remote control, hold down SHIFT and press REC/
REC PAUSE twice to start recording.
•Volume or tone adjustment(s) does not affect recording.
TAPE RECORDING
… 13 …


Need help? Post your question in this forum.

Forumrules
1

Forum

aiwa-xr-em20

Reset search

  • I’m trying to change the language from Spanish to English Submitted on 19-3-2022 at 22:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa XR-EM20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa XR-EM20 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info