Manual Aiwa XR-EM20 (page 2 of 20) (English, French, Spanish)

496634

Zoom out

Zoom in

1/20

WARNING

To reduce the risk of fire or electric shock, do not expose

this appliance to rain or moisture.

Explanation of Graphical Symbols:

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product’s enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the appliance.

Read the Operating Instructions carefully and completely before

operating the unit. Be sure to keep the Operating Instructions for

future reference. All warnings and cautions in the Operating

Instructions and on the unit should be strictly followed, as well as

the safety suggestions below.

Warning

To prevent electric shock or injury, these safety instructions should

be followed in the installation, use and servicing the unit.

Installation

Attachments - Do not use attachments not recommended by the

unit manufacturer as they may result in the risk of fire, electric shock

or injury to persons.

Water and Moisture - Do not use this unit near water - for

example, near a bathtub, washbowl, kitchen sink, or laundry tub, in

a wet basement, or near a swimming pool, and the like.

Heat - Do not use this unit near sources of heat, including heating

vents, stoves, or other appliances that generate heat. It also should

not be placed in temperatures less than 5˚C (41˚F) or greater than

35˚C (95˚F ).

Mounting surface - Place the unit on a flat, even surface.

Accessories - Do not place this unit on an unstable cart, stand,

tripod, bracket, or table. The unit may fall, causing serious injury

to a child or an adult, and serious damage to the appliance. Use

only with a cart, stand, tripod, bracket, or table recommended by

the manufacturer, or sold with the unit. Any mounting of the

appliance should follow the manufacturer’s instructions, and should

use a mounting accessory recommended by the manufacturer.

Portable cart - An appliance and cart

combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to

overturn.

Ventilation - The unit should be situated with adequate space

around it so that proper heat ventilation is assured. Allow 10 cm

clearance from the rear and the top of the unit, and 5 cm from the

each side.

Slots and openings in the cabinet and the back or bottom are

provided for ventilation, and to ensure reliable operation of the unit

and to protect it from overheating, these openings must not be

blocked or covered. The openings should never be blocked by

placing the unit on a bed, sofa, rug or other similar surface. This

unit should not be placed in a built-in installation such as a bookcase

unless proper ventilation is provided.

Object and Liquid Entry - Never push objects of any kind into

this unit through the cabinet slots as they may touch dangerous

voltage points or short-circuit parts that could result in a fire or

electric shock. Never spill liquid of any kind on the unit.

Electric Power

Power Sources - This unit should be operated only from the type

of power source indicated on the marking label. If you are not sure

of the type of power supply to your home, consult your appliance

dealer or local power company. To operate unit on battery power, or

other sources, refer to the operating instructions.

Grounding or Polarization - This unit is provided with a polarized

alternating-current line plug (a plug having one blade wider than

the other). This plug will fit into the power outlet only one way.

This is a safety feature. If you are unable to insert the plug fully into

the outlet, try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet. Do not defeat

the safety purpose of the polarized plug.

Power-Cord Protection - Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to cords at

plugs, convenience receptacles, and the point where they exit from

the product.

Overloading - Do not overload wall outlets, extension cords,

integral convenience receptacles as this can result in a risk of fire

or electric shock.

IMPORTANT SAFETY INSTRUCTIONS

I’m trying to change the language from Spanish to English Submitted on 19-3-2022 at 22:44
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa XR-EM20 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa XR-EM20 Manual

Product: