48847
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
En
Before starting connection, check that the protective
tag has been taken off (see page 3).
Connection
Plug in the AC power cord to the AC outlet after all other
connections are made.
1
Connect the speaker cords to the speakers.
Connect the copper cords to the + terminals and the silver
cords to the – terminals.
2
Connect the speakers to the main unit.
Connect the right speaker to the SPEAKERS R terminals
and the left to the SPEAKERS L terminals. The copper
cords go to the 0 terminals.
PREPARATIONS
3
Connect the supplied antennas.
Connect the FM antenna to the FM 75 terminals and
the AM antenna to the AM LOOP jack. Connect the FM
antenna to the FM 75 terminals without the 2 mark,
as illustrated.
4
Connect the AC power cord to an AC outlet.
The clock will flash on the display.
For setting the clock, see page 12.
Speakers
Do not short-circuit the 0 and 9 speaker cord leads.
Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.
Antennas
Keep antennas away from metallic objects, electrical
equipment and cords.
FM antenna: Extend fully and position for the best
reception. If reception is poor, connect an optional outdoor
antenna to the FM 75 terminals. When connecting an
optional outdoor antenna, be sure to connect the shield braid
of the antenna to the 2 terminal.
AM antenna: Rotate to find best reception.
AM antenna
FM antenna
Remote control
Detach the battery compartment lid at the rear of the remote
control and insert two R6 (size AA) batteries with correct
polarity.
R6(AA)
Replace the batteries with new ones when the operational
distance between the remote control and main unit becomes
shorter.
Remove the batteries if the unit is not going to be used for
an extended period of time.
The remote control may not operate if it is used under intense
sunlight or if its line of sight is obstructed.
01_04_09_XREC10_UC_En 02.3.15, 7:05 PM4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa XR-EC12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa XR-EC12 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info