152330
13
Zoom out
Zoom in
Previous page
1/20
Next page
Basic operations
13
About recorded tracks
•Whenever you stop recording, the audio recorded up to that point will be stored as a track.
•A new track is recorded after the end of the last track already stored.
During recording if the player’s memory becomes full, the OPE indicator flashes in red and the
existing tracks will be erased starting with the first track.
To separate tracks automatically (Auto Track)
Set the /AUTO TRACK switch to ON before pressing REC/ERASE in step 3.
Recording from the external audio device will automatically be paused when 4 seconds of
silence are detected, and all audio recorded to that point will be stored as a track.
If an incoming signal is detected again within 20 seconds after entering the recording pause
mode, recording will start for another new track.
If 20 seconds have passed without any audio signal detected, recording stops automatically, and
it will not start thereafter even if there is audio input again. To resume recording, press REC/
ERASE.
Notes
•Track separation may not be done correctly depending on the condition of the external audio device and the
song to be recorded.
•Depending on the connected audio device, the sound may become louder when recording. In this case, adjust
the volume on the connected audio device.
Erasing tracks one by one
You can erase tracks while playing, one track at a time.
1
Play the track you want to erase.
2
Press and hold REC/ERASE.
Two short beeps sound in the headphones, and the first 5 seconds of the track are repeated
three times while the OPE indicator is flashing in red.
Make sure this is the track you want to erase.
If you decide not to erase the track
Press PLAY/STOP.
Playback starts normally from the beginning of the track without erasing the track.
The track will not be erased either if no buttons are pressed while the first 5 seconds of the
track are repeated.
3
Press REC/ERASE.
The OPE indicator flashes quickly in red.
When a long beep is heard, the track is erased, the OPE indicator starts flashing in green,
and playback starts normally from the next track.
Note
It takes about 10 seconds to erase a track.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa uz ps 128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa uz ps 128 in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info