793980

Aiwa RMD-99ST Manual

12
Zoom out
Zoom in
Previous page
1/80
Next page
en 22
23
FM STEREO & BANDWIDTH
FM/SW RECEPTION
While listening to FM stereo stations, press the [ST.] button. The “ ” indicator
will appear on the screen to activate the STEREO listening mode.
If the received FM transmission signal is too weak, deactivate the stereo function by
pressing the [ST.] button again.
Plug in the external wire antenna to the FM & SW ANTENNA jack of this radio, and
then hang its end outside the window for better reception of FM and SW.
Repeat pressing the [AM] or [BW] buttons to select your desired 6, 4, 3, 2, 1 kHz
bandwidth.
Wide band:
It has better audio fidelity when receiving strong signals or local stations.
Narrow band:
It is suitable to receive weak and long distant stations as narrow band is able to
limit the interference from adjacent strong signal and reduce background noise.
FM ST. (FM STEREO)
HOW TO IMPROVE FM / SW RECEPTION
AM BW (BANDWIDTH)
Note:
• The stereo function will not be activated if the FM station is not stereo broadcasting.
Note:
• When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them might be fatal.
Window
FM & SW Antenna
Wire antenna
External wall
LINE-IN MODE
This unit can be used as an active speaker for laptop computers, MP3 and other small
audio players following below steps.
Auxiliary input function mode
Line in jack
1. Connect the audio cable to the LINE IN jack; the display will show a “ ”
symbol confirming that the plug has been connected with the radio.
2. Press the POWER button with the symbols “ ” flashing to play; then rotate
the VOLUME button to adjust the volume.
3. Press the POWER button again to turn o the speaker of the radio.
1 . Batteries must be inserted correctly in accordance with the polarity marks
to avoid damage to the radio.
2. If the batteries haven’t been changed in a long time, the clock of the radio
will stop working. However, the pre-stored frequencies are still kept.
The clock will work again after new batteries are re-installed.
3. When the battery power is low, the “ ” symbol new the display will flash
advising you to replace the exhausted batteries for new ones.
The radio will turn o automatically when the battery power isn’t enough.
4. Mixing used and new batteries may cause damage to the radio and also display
the power capacity incorrectly.
5. Remove the batteries from the battery compartment, if the radio is not
going to be used for a long period of time.
This will prevent the leakage of batteries that may can damage the radio.
MP3 earphone input
Auxiliary cable
USING BATTERIES
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa RMD-99ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa RMD-99ST in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info