Manual Aiwa NSX-V2100 (page 14 of 52) (English, French, Spanish)

496591

Zoom out

Zoom in

1/52

SETTING THE TIMER

2,4

1,2

The unit can be turned on at a specified time every day with the

built-in timer.

Preparation

Make sure the clock is set correctly. (See page 4.)

Press the TIMER button on the remote control

white pressing the SHIFT button once to display

0, and press the 11SET button within 4 seconds.

is displayed, and the hour flashes.

If you do not press the I I SET button within 4 seconds, another

operation may start.

Designate the hour of the timer-on time by

pressing the 1<< DOWN or

➤>1 UP button, and

the 11SET button. Repeat to designate the minute

of the timer-on time.

After you designate the timer-on time, TIMER and one of the

source name flashes alternately on the display for 4 seconds.

Within 4 seconds, press one of the function

buttons to select a source.

“TIMER and the selected source name flash alternately for

4 seconds.

● If this step is not completed within 4 seconds, repeat from

step 1.

● If the TUNER button is pressed, the band cannot be selected

in this step.

Within 4 seconds, select the duration for the

timer-activated period with the l<< DOWN or WI

UP button.

The duration for the timer-activated period can be set between

5 and 240 minutes in 5-minute steps.

● If this step is not completed within 4 seconds, repeat from

step 1.

Prepare

the source.

To listen to a CD, load the disc to be played first on tray 1.

To listen to a tape, insert the tape into deck 1 or 2.

To listen to the radio, tune in to a station.

Press the POWER button to turn the unit off after

adjusting the volume and tone.

remains on the display after the power is turned off (timer

standby mode).

Get ready for the TAPE function or the timer

recording.

To listen to the tape, press the > button.

To record the source, press the

● button on deck 1.

When the timer-on time is reached, the unit turns on and

begins play with the selected source. While the timer is in

operation, the display indication is dimmer than usual.

The timer recording period and tape length

When the length of the tape to be recorded is shorter than the

timer recording period, the

● button on deck 1 is released before

the timer is

off.

When the tape length is longer than the timer recording period,

the

● button is not released. If the ● is not released for a long

time, the tape in the deck may be damaged. Press the 9/S

button to release the . button.

To cancel the timer standby mode temporarily

While pressing the SHIFT button, press the TIMER button so

that 0 goes out in the display.

To restore the timer standby mode, press the TIMER button while

pressing the SHIFT button to display 0.

If using the unit after setting the timer

After setting the timer, you can use the unit. After using the unit,

check whether the contents in steps 5 and 6 are set as you wish,

turn off the power and set step 7 if necessary.

To change the specified time and function

Repeat all the steps again.

To check the specified contents

While pressing the SHIFT button, press the TIMER button. The

timer-on time is displayed for 4 seconds.

- Timer playback and timer recording will not begin unless the

power is turned off.

● Connected equipment cannot be turned on and off by the built-

in timer of this unit. Use an external timer.

13 ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-V2100 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 7,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa NSX-V2100 Manual

Product: