496591
10
Zoom out
Zoom in
Previous page
1/52
Next page
)
BASIC OPERATIONS
:= ~ ==’
(Deck 1)
(Deck 2)
Usable tapes
Use only normal (type I) tapes.
1 Press the TAPE button.
2 Press the
l= button to open the cassette holder
and insert a tape exposed side down.
Push the cassette holder to close it.
3 Press the F button to start playback.
Only the side facing you can be played back.
To stop playback
Press the W= button.
To pause
Press the II button.
To resume play, press it again.
To fast forward or rewind
In the stop mode, press the++ or bb button, and then press
the
14 button to stop winding.
When both deck 1 and deck 2 are set in the playback
mode
Deck 2 is heard.
BASIC RECORDING
Preparation
Wind up the tape to the point recording starts.
Note that recording is done on only one side of the tape.
Use only normal (type I) tapes.
1
2
3
Insert the tape to be recorded on into deck 1 and -
push the cassette holder to close it.
Get ready for the source to be recorded.
To record from a CD
Press the CD button and load a disc.
To record from a tape
Press the TAPE button. Then, insert the original tape into
deck 2 and play it.
To record from a radio broadcast
Press the TUNER/BAND button and tune in to a station.
To record from the connected source
Press the ViDEO/AUX button and play it.
Press the button to start recording.
The F button is depressed simultaneously. -
When recordina from a CD, playing and recording start
simultaneously from the first track.
To stop recording
Press the WA button on deck 1.
To pause recording
Press the II button on deck 1.
To resume recording, press it again.
To record selected tracks of the CD
Before pressing the
button, program the tracks (see page 8).
To start recording precisely (except when recording from
a
CD)
Before pressing the button at step 3, press the 11 button on
deck 1. Then, press the
button. The deck enters recording
pause mode. When you wish to start recording, press the II
button again.
To record part of the CD
When the
button is pressed, recording always starts from the
first track. To start in the middle of a track, play the CD first and
press the 11button for CD at the point you wish to start recording
from. Then, press the
button. The pause mode for CD button
is released automatically and recording starts.
9 ENGLISH
m
Do not press the buttons on deck 2 during recording.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-V2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-V2100 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 7,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info