496590
52
Zoom out
Zoom in
Previous page
1/62
Next page
/
(
f
nr
/ /
I
m
D
?
a
CARE AND MAINTENANCE
Occasional maintenance of the unit and care of the software are
needed to optimize the operations of your unit.
To clean the cabinet
Use a soft cloth lightly moistened with mild detergent solution. Do
not use strong solvents, such as alcohol, benzine or thinner.
To clean the heads and tape paths
After every 10 hours of use, clean the heads and tape paths with
a head cleaning cassette or cotton swab moistened with cleaning
fluid or denatured alcohol. (These cleaning kits are commercially
available.)
When cleaning with a cotton swab@, wipe the recordinglplayback
head @, erasure head @ (deck 1 only), pinchrollers @, and
capstans @. + See illustration
m
After the heads and tape paths have been cleaned with a liquid
head cleaning cassette or a moistened swab, inserf tapes into the
decks after the cleaned parts are completely dried.
Care of discs
Before playing a disc, wipe it from the center out with a cleaning
cloth. + See illustration
.
After playing a disc, store it in its case. Do not leave the disc in
places that are hot or humid.
Care of tapes
Store tapes in their cases after use.
Do not leave tapes near a magnet, motor, television set, or any
source of magnetism. This will downgrade the sound quality and
cause noise.
Do not expose tapes to direct sunlight, or leave them in a car
parked in direct sunlight.
CASSEllE TAPE NOTES
Tape slack
Checkandtightenslacktape beforeusewitha pencilorsimilartool.
Slack tape may break or get jammed in the mechanism. + See
illustrationE
120-minute or longer tapes
These are extremely thin and easily deformed or damaged. They
are not recommended.
To prevent accidental erasure
Break off the plastic tabs on the cassette tape after recording with
a screwdriver or other pointed tool. + See illustration
@ Side A
@ Tab for side A
To record on the tape again, cover the tab openings with cello-
phane tape @. + See illustration
54
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-V20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-V20 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 17,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info