496587
20
Zoom out
Zoom in
Previous page
1/27
Next page
19
ENGLISH
PROGRAMMED EDIT RECORDING
5
MULTI JOG
s
4
2
8
1
3,7
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape.
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded from the beginning of
either side.
1
Insert the tape into deck 2, and press DOLBY NR
to turn Dolby NR on or off.
Insert the tape with the side to be recorded on first facing out
from the unit.
2
Press CD and load the disc(s).
3
Press CD EDIT/CHECK twice.
“EDIT” lights up and “PRGM” flashes on the display.
When “AI” is displayed, press CD EDIT/CHECK again.
4
Press
ff
ff
f or
gg
gg
g to designate the tape length.
10 to 99 minutes can be specified.
The numbered buttons 0-9 or MULTI JOG are also available
to designate the tape length.
5
Press DISC DIRECT PLAY, then press numbered
buttons 1-5 within 3 seconds on the remote
control to select a disc. Then press numbered
buttons 0-9 and +10 to program a track.
Example:
To select the 10th track of disc 2, press DISC
DIRECT PLAY and 2, then press +10 and 0.
6
Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
7
Press CD EDIT/CHECK to select side B and
program the tracks for side B.
After confirming B on the display, repeat step 5.
8
Press
ww
ww
w REC/REC MUTE to start recording.
The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and recording
starts. When recording on the front side (A) ends, recording
on the back side (B) starts.
To stop recording
Press s. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK to select side A or B,
and press f or g repeatedly or turn MULTI JOG.
To change the program of each side
Press CD EDIT/CHECK to select side A or B, and press s
CLEAR to clear the program of the selected side. Then program
tracks again.
To clear the edit program
Press s twice so that “EDIT” disappears on the display.
Recording is inhibited if the erasure prevention tab on either
side of the tape is broken off.
Up to 30 tracks can be programmed from any of the inserted
discs.
“FULL” is displayed if you attempt to program more than 30
tracks.
Maximum recording
time for side A
Programmed tracks
Remaining time of side A
Tape side B (reverse side)
Program number
Track number
Programmed track numbers
Disc number
PRGM EDIT
Tape side (A)
Tape length
Selected disc
number
Selected track number
Program number
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-MTD77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-MTD77 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info