Manual Aiwa NSX-MT75 (page 19 of 80) (English, French, Spanish)

496577

Zoom out

Zoom in

1/80

PLAY WITH DOLBY PRO LOGIC

,,., ––––– –,––––, ––, – –,–. ,!– –-,,= na, ,., n.–– ,. —–. ––,

————.

IT me surrouna speaKers level OTme aumnuu Ivu IS cnangea

(see page 7), that of the DOLBY PRO LOGIC is also changed.

About the channels

The left and right speakers

create the stereo effect,

The center speaker helps achieve precise sound positioning

over a broad sound field.

The rear-mounted surround speakers enhance the “depth” of

the sound field,

change the delay time

The surround speakers reproduce sounds a split second after

the front speakers. The delay is initially set to 21 ms

(milliseconds),

To change this standard delay time, press the MANUAL SELECT

(TEST) button on the remote control repeatedly until “TIME” is

displayed, Then, press the DOWN 1< or UP

➤M button. Each

time one of the buttons is pressed, the delay time changes as

shown below.

15mS+21mS~30mS

DOLBY PRO LCIGIC

DOLBY

PRO LOGIC

Press the VIDEO/AIJX button and start playback

of the video source.

Press the DOLBY PRO LOGIC button.

NORMAL is selected, and the playback sound has the DOLBY

PRO LOGIC effect,

To cancel Dolby Pro Logic mode

Press the DOLBY PRO LOGIC button repeatedly until P-OFF is

displayed,

To change the sound levels during playback

After adjusting the balance with the noise sequencer, the sourld

levels of the center or surround speakers can be adljusted during

playback of laser discs or video software.

1 Press the MANUAL SELECT (TEST) button on the remo!e

control repeatedly to select “CEN” (center) or “SUF{”

(surround).

2 While the “CEN” or “SUR” is displayed, press the DOWIN 1<.4

or UP

➤>1 button on the remote contrc)l to adjust the velume.

ADDITIONAL DOLlBY PRO LOGIIC MO[)ES

In addition to the NORMAL mode, this unit is also equipped with

the PHANTOM and the 3 CH LOGIC modes.

PHANTOM mode: Use thie mode when no center speaker is

connected. The center channel signals are output through the

left and right speakers.

CH LOGIC mode: Use this mode when no surround speakers

are connected. This mode reproduces rear sounds through the

front speakers.

To select PHANTOM or 3 CH LOGIC

Press the DOLBY PRO LOGIC button repeatedly until the desired

Dolby Pro Logic mode is displayed, The lDolby Pra Logic mocle

is displayed cyclically as follows.

NORMAL - PHANTOM s 3 CH LOGIC –

~ cancel

—1

To adjust the balance of connected slpeaker sound levells

Carry out steps 2 to 4 on page 17.

● Depending on the sound source and/or listening conditions, a

surround effect may not be obtained even when the DOLBY

PRO LOGIC is on.

● The full DOLBY PRO LOGIC effect cannot be obtained when

using software without 0[1 IDOLBYSLIRROUNDImark. In this case, use

the SURROUND system instead. (See page 7.)

ENGLISH18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-MT75 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 12,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa NSX-MT75 Manual

Product: