496582
17
Zoom out
Zoom in
Previous page
1/104
Next page
MONO
TUNER
TUNER
BAND
1
2
J
Press TUNER/BAND repeatedly to select the
desired band.
FM — AM
1
When TUNER/BAND is pressed while the power is off, the
power is turned on directly.
Press 4 DOWN or > UP to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, “TUNE” is displayed for 2 seconds,
During FM stereo reception, (11011)is displayed.
([(cm])
TUNE
To searclh for a station quickly (Auto Search)
Keep +-4 DOWN or * UP pressed until the frequency starts
to change rapidly, After tuning in to a station, the search stops.
To stop the Auto Search manually, press++ DOWN or - UP.
* The AutoSearch maynotstopat stationswithveryweak signals.
When an FM stereo broadcast contains noise
Press MONO TUNER on the remote control so that “MONO
appears on the display.
Noise is reduced, although reception is monaural.
To restore stereo reception, repeat the above so that “MONO”
disappears.
To change the AM tuning interval
The default setting of the AM
tuning interval is 10 kHz/step, If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval,
Press POWER while pressing >.
To reset the interval, repeat this procedure.
m
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1
Press TUNER/13 AND to select a band, and press
<< DOWN or > UP to select a staticm.
2 Press 11 SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Preset number
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored.
m
“FULL’ is displayed if you attempt to
store more than 32 preset
stations,
1
2
Press TUNER/BAND to select a band.
Press numbered buttons O-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10
and O.
To select preset number 15, press
+10 and 5.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band. Then, press +>
repeatedly or turn MULTI JOG.
Each time b is pressed, the next ascending number is
selected.
To clear a preset station
Select the presetnumberofthe stationto be cleared.Then, press
CLEAR, and press II SET within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
A -,,
ENGLISH ! /
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-MT725 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-MT725 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 17,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info