496580
18
Zoom out
Zoom in
Previous page
1/92
Next page
This section explains how to record from the tuner, CD player, or
external equipment.
l__~_l
3
Preparation
Use Type I (normal) and Type II (high/CrOz) tapes for recording.
Set the tape to the point where recording will start.
1
2
3
4
Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
Press REV MODE to select the reverse mode.
To record on one side only, select 1.
To record on both sides, select => or (1).
Press function (CD, TUNER, VIDEO/AUX or MD)
and prepare the source to be recorded.
To record from a CD, press CD and load the disc(s).
To
record from a radio broadcast, press TUNER and tune
in to a station.
To record from a connected
source, press VIDEO/AUX or
MD.
Press REC/REC MUTE to start recording.
When the selected function is CD, playback and re;ording
start simultaneously.
When recording from a connected source, start playback of
the source.
To
stop recording, press .
To pause recording, press II. (Applicable when the source is
TUNER, VIDEO/AUX or MD) To resume recording, press it again.
To start recording with the remote control
First press /0 REC/REC MUTE, and then press 4> within 2
seconds.
Sound adjustment during recording
The output volume and tone (except BBE and Rhythm play
function) of the speakers or headphones may be freely varied
without affecting the recording.
. .“-----..”.”.”.”...L,”w,*~****-*~m,*,!j!j
$*eiwa*w4@:---8w%Jw$ww-ww*w*ww#mwx-&-. w&........-. %. -
INSERTING BLANK SPACES
Insertion of 4-second blank spaces enables you to activate the
Music Sensor function. (Applicable when the source is TUNER,
VIDEO/AUX or MD.)
1
Press . REC/REC MUTE during recording or while in
recording pause mode.
~
on the display flashes for 4 seconds and the tape runs
without recording. After 4 seconds, the deck enters the
recording pause mode.
2
Press II to resume recording.
To insert a blank space of less than 4 seconds, press
REC/REC MUTE again while ~ is flashing.
To insert blank spaces of more than 4 seconds,
after the deck
enters recording pause mode, press
REC/REC MUTE again.
Each time the button is pressed, a 4-second blank space is
added.
To erase a recording
Make sure the microphone is not connected to this unit and the
Rhythm play function (page 7) is canceled.
Set the microphone volume and the echo level to OFF (See page
23).
1
2
3
4
Insertthe tape to be erased into deck 2 and press TAPE DECK
1/2 to display ‘(TP 2“.
Set the tape to the point where the erasure is to be started.
Set the reverse mode by pressing REV MODE.
Press
REC/REC MUTE to start the erasure.
17 ENGLISH
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-MT720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-MT720 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info