496580
12
Zoom out
Zoom in
Previous page
1/92
Next page
1
2
3
4
.-
‘3U
)
\\
:..__________.__—- ——-
-.1’
/
Set a new DSP SURROUND sound with DELAY,
EFFECT, and MULTI JOG.
See “SETTING A NEW DSP SURROUND SOUND
MANUALLY.
Within 4 seconds, press ENTER.
“MI” flashes on the display.
If this step is not completed within 4 seconds, press
SURROUND firstto display “DSP ON”. Then press ENTER
within 4
seconds.
Within 4 seconds, turn MULTI JOG to select one
of the manual modes Ml - M4.
Within 4 seconds, press ENTER.
The new DSP SURROUND sound is memorized.
To select the stored DSP SURROUND sound
Press SURROUND, and turn MULTI JOG to select one of the
manual modes Ml - M4 within 4 seconds,
To adjust the volume of the surround speakers
Press MANUAL SELECT twice or three times on the remote
control,
“S-L” or “S-R” is displayed for 2 seconds. Press M
DOWN or
FM UP on the remote control within these 2
seconds.
The DOLBY PRO LOGIC (page 21) and the DOLBY DIGITAL
SURROUND (page 28) surround speakers level is also
changed.
MONO
1 Press TUNER BAND repeatedly to select the
desired band.
~FM— AM—l
2
When TUNER BAND is pressed while the power is off, the
power is turned on directly.
Press ++ DOWN or * UP to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, “TUNE is displayed for 2 seconds.
During FM stereo reception, (l(m)]) is displayed.
([KEN))
TUNE
To search for a station quickly (Auto Search)
Keep + DOWN or - UP
pressed until the frequency starts
to change rapidly. After tuning in to a station, the search stops.
To stop the Auto Search manually, press -
DOWN or ~
UP.
The Auto Search may not stop at stations with very weak
signals.
When an FM TUNER stereo broadcast contains noise
Press MONO TUNER on the remote control so that “MONO”
appears on the display.
Noise is reduced, although reception is monaural.
To restore stereo reception, press MONO so that ‘(MONO”
disappears.
The SURROUND mode is canceled when:
- the ECHO level is changed.
- the DOLBY PRO LOGIC is turned on.
- the headphones are plugged in.
- the 5.1 CH (page 28) is selected.
1I ENGLISH
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-MT720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-MT720 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info