496555
46
Zoom out
Zoom in
Previous page
1/80
Next page
Notes on presetting
s Presetting is not possible when Dolby surround
is on.
. If an excessive peak level is selected, the
equalizer adjusts to make a proper equalization
curve.
To select a manually preset curve
1 Press the GEQ button, then the DSP/GEQ-
OFF/ON button.
2 Press the PRGM/MANU button to select the
manual mode.
3 Press the number of the desired preset number.
To select a preset curve with the remote control
1 Press the GEQ button, then the DSP/GEQ-
OFF/ON button.
2 Press the PRGM/TEST TONE or MANUAL/
MODE button repeatedly until the desired preset
curve is selected.
Notes
. The CURSOR CONTROL buttons are also
used to adjust the DSP. Before adjusting the
graphic equalizer, do one of the following:
If the equalizer is on: Press the GEQ button.
If the equalizer is off: Press the GEQ, then
DSP/GEQ-OFF/ON button.
A new equalization cutve cannot be set when
the DSP is on. Before setting, press the DSP/
EFFECT button, and then the DSP/GEQ-OFF/
ON button to turn off the DSP.
Notas sobre el preajuste
El preajuste no sera posible cuando este
activado el efecto perimetrico Dolby.
Si selecciona un nivel de pico excesivo, el
ecualizador 10ajustara para componer la curva
de ecualizacion adecuada.
Para seleccionar una curva adjustado
manualmente
1 Presione el boton GEQ, y despues el boton
DSP/GEQ-OFF/ON.
2 Presione el boton PRGM/MANU para selec-
cionar el modo manual.
3 Presione el boton correspondiente al numero
de preajuste deseado.
Para seleccionar una curva con el controlador
remoto
1 Presione el boton GEQ, y despues et boton
DSP/GEQ-OFF/ON.
2 Presione repetidamente el boton PRGM/TEST
TONE o MAN UAUMODE hasta seleccionar el
preajuste curva deseado.
Notas
Los botones del cursor (CURSOR CONTROL)
se utilizan tambien para ajustar el DSP. Antes
de ajustar el ecualizador grafico, reslice una de
Ias dos operaciones siguientes:
Si el ecualizador esta activado: Presione el
boton GEQ.
Si el ecualizador est~ desactivado: Presione
GEQ, y despues el boton DSP/GEQ-OFF/
ON.
Cuando el DSP este activado no sera posible
ajustaruna nuevacurvade ecualizacion. Antes
de ajustarla, presione el boton DSP/EFFECT,
y despues el boton DSP/GEQ-OFF/ON para
desactivar el DSP,
Remarques sur Ies courbes d’egalisation
prereglees
. Le prerbglage n’est pas possible si Ie Dolby
surround est en service.
Si vous selectionnez un niveau de cr6te trop
eleve, I’egaliseur I’ajuste pour realiser une
courbe d’egalisation correcte.
Pour selectionner une courbe prereglee
manuellement
1 Appuyez sur GEQ, puis sur DSP/GEQ-OFF/
ON.
2 Appuyez sur PRGM/MANU pour selectionner
Ie mode manuel (MANU).
3 Appuyezsurlatouchede prereglagesouhaitee.
Pour selectionner une courbe prereglee avec
la telecommande
1 Appuyez sur GEQ, puis sur DSP/GEQ-OFF/
ON.
2 Appuyez de fagon repetee sur PRGMfiEST
TONE ou MANUAUMODE jusqu’~ ce que la
courbe souhaitee soit selectionnee.
Remaraues
Les ~ouches CURSOR CONTROL peuvent
egalement servira reglerle DSP. Avant d’ajuster
I’egaliseur graphique, procedez comme suit:
Si I’egaliseur est allume: Appuyez sur GEQ.
Si I’egaliseur est eteint: Appuyez sur GEQ,
puis sur DSP/GEQ-OFF/ON.
Quand Ie DSP est utilise, il n’est pas possible
de regler une nouvelle courbe d’6gaIisation,
Appuyer auparavant sur DSP/EFFECT, puis
sur DSP/GEQ-OFF/ON pour arr~ter Ie DSP.
46
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-D939 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-D939 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 29,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info