496555
41
Zoom out
Zoom in
Previous page
1/80
Next page
About STSD (Same Tape Side Dubbing)
This feature allows both sides of the dubbed tape
to match those of the original tape,
The reverse side of both tapes will start at the
same time as soon as the longer tape has been
reversed.
If the leader segment of the tape to be recorded
is longer than that of the tape to be played back,
recording on the reverse side may start and
stop midway. If so, see “TO dub portions of a
tape or to dub with adjusting GEQ, DSP or
BBE below,
Notes on tape-synchronized dubbing
The same Dolby NR system used on the source
tape is automatically used on the recorded
tape.
If one of the tabs on the back of the recording
tape has been removed, STSD cannot be done.
Dub using the method below.
To dub portions of a tape or to dub with
adjusting GEQ, DSP or BBE
1
2
3
4
5
6
7
inserf ~he tapes as shown on page 40.
Press the TAPE button.
Select the direction and find the location to
which to record on deck 2.
Select the direction and find the location from
which to play on deck 1.
Match the DOLBY NR with the tape in deck 1.
Press the DECK 1/2 button to select deck 1.
Press the REC/REC MUTE button to start
recording.
The reverse mode is automatically set to Z,
and dubbing stops when the recording tape
reaches the end of one side.
Turn off the Dolby NR when playing back tapes
recorded in this way.
If noise occurs while dubbing
Turn off a nearby television or move it away from
the system.
Note
While dubbing, only the= STOP buttons operate.
Duplication de lamisma caradel casete(STSD:
Same Tape Side Dubbing)
Esta funcion Ie permitira hater que ambas caras
del casete duplicado scan identicas a Ias del
casete original.
Las cintas de Ias caras pc,steriores de ambos
casetes se pondran en movimiento al mismo
tiempo tan pronto como se haya invertido el
casete de mayor duration.
Si el segmento guia de la cinta que desee
duplicates mas Iargoqueel de Iacintaoriginal,
la grabacion de la cara posterior puede cesar
antes de que finalice la cinta original. En este
case, consulte la seccion “Para duplicar
ajustando el sonido de una cinta con GEQ,
DSP
o BBE de partes de una cinta” ofrecida a
continuation.
Notas sobre la duplication sincronizada
En la cinta duplicada se utilizara
automaticamente el mismo sistema de
reduccion de ruido DolbI que el usado para
grabar la cinta original.
Si una de Ias Iengtietas de la parte posterior del
casete para grabacion esta rota, no podra
realizarse la duplicacicm STSD. Duplique
utilizando el metodo siguiente.
Para duplicar ajustando el sonido de una cinta
con GEQ, DSP o BBE de partes de una cinta
1
2
3
4
5
6
7
Inserte Ios casetes corno se muestra en la
pagina 40.
Presione el boton TAPE.
Busque el Iugar y seleccione el sentido en el
que desee grabar en el cleck 2.
Busque el Iugar y seleccione el sentido en el
que desee reproducer en el deck 1.
Ajuste el mismo sistema de reduccion de ruido
Dolby que en el deck 1.
Presione el boton DECK 1/2 para seleccionar
deck 1.
Presione el boton REC/REC MUTE para
imciar la grabacion.
El modo de inversion se ajustara automa-
ticamente a Z, y la duplication cesara cuando
Iacintadegrabacion Ilegue al final de unacara.
Para reproducer cintas grabadas de esta forma,
desactive el sistema de reduccion de ruido
Dolby.
Si se produce ruido duralnte la duplication
Apague el televisor que se encuentre cerca o
alejelo del sistema.
Nota
Durante la duplication, scdamente funcionaran
Ios botones E STOP.
En ce qui concerne la copie synchronisee
(STSD)
Cette fonction permet de faire correspondre Ies
deux faces de la cassette copiee a celles de la
cassette originale.
La face arriere de chaque cassette demarre en
m6metemps des que la cassette la pIus Iongue a
ete inversee.
Si I’amorce de la bande pour I’enregistrement
est plus Iongue que celle pour la lecture,
I’enregistrement sur la face arriere risque de
commencer et de s’arr6ter au milieu d’un
morceau. Dans ce cas, voir “Pour copier des
passages d’une cassette ou pour copier en
ajustant GEQ, DSP ou BBE” ci-dessous.
Remarques sur la copie de cassette
synchronisee
Le Dolby selectionne pour la cassette
d’enregistrement est Ie m~me que celui utilise
sur la cassette source.
Si un des ergots de la cassette pour
I’enregistrement est absent, la copie
synchronisee n’est pas possible. Procedez
comme ci-dessous pour faire la copie.
Pour copier des passages d’une cassette ou
Dour cooier en aiustant GEQ, DSP ou BBE
i
2
3
4
5
6
7
.
Inserez Ies cas;ettes comme indique a la page
40.
Appuyez sur TAPE.
Selectionnez Ie sens de defilement et Iocalisez
Ie point a partir duquel I’enregistrement doit
commencer sur la platine 2.
Selectionnez Ie sens de defilement et Iocalisez
Ie debut de la cassette sur la platine 1.
Selectionnez Ie m~me Dolby que celui de la
cassette clans la platine 1.
Appuyez sur DECK 1/2 pour selectionner la
platina 1,
Appuye,z sur REC/REC MUTE pour
declencher I’enregistrement.
Le mode d’inversion est regle automatiquement
sur X et la copie s’arrete Iorsque la cassette
d’enregistrement est terminee.
Arr&ez Ie Dolby NR auand Ie Iecteur reproduit
des cassettes enregistrees de cette maniere.
S’il y a des parasites pendant la copie
Eteignez Ieteleviseursitue a proximit60u eloignez-
Ie de la cha~ne,
Remarque
Pendant la copie, seule la touche STOP
fonctionne.
41
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-D939 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-D939 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 29,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info