496555

Aiwa NSX-D939 Manual

12
Zoom out
Zoom in
Previous page
1/80
Next page
To turn on the power
Plug in the AC cord and press the POWER button.
To select a source
After turning on the power, press one of the
FUNCTION select buttons,
The CD or TAPE function is also selected and
playback started by pressing the respective PLAY
button. However, if a CD or tape is not inserted,
playback does not begin.
The TUNER function can also be selected by
pressing the BAND button, followed by one of the
STATION PRESET buttons. The previous station
of the last band is selected.
To listen through headphones
Plug in headphones with a standard 6.30 plug into
the PHONES jack.
Using the control stage
In addition to the buttons and switches on the main
unit and remote control, there is also a retractable
control panel on the amplifier.
To extend the control stage
Press the OPEN/CLOSE button to extend the
stage. The stage also opens when the DOLBY
SURROUND or DSP button is pressed. However,
if no operation is activated after about 10 seconds,
the stage automatically closes.
To close the control stage
Press the OPEN/CLOSE button again toclosethe
stage, or lightly push in the stage, The stage
retracts into the amplifier.
Para conectar la alimentacion
Enchufe el cable de alimentacion de CA ypresione
el boton POWER.
Para seleccionar una fuente
Despues de haber conectado la alimentacion,
presione uno de Ios botones FUNCTION.
La funcion del reproductor de discos compactos
(CD) o de) deck de casetes (TAPE) tambien se
seleccionara y se iniciara la reproduction
presionando el boton PLAY respective. Sin
embargo, si no hay disco compacto o cinta
insertado, la reproduction no se iniciara.
La funcion del sintonizador (TUNER) tambien
podra seleccionarse presionando el boton BAND
ydespues unode Ios botones STATION PRESET.
Se seleccionara la ultima emisora de la banda
previamente emisoras.
Para escuchar con auriculares
Enchufe unos auriculares con clavija estandar de
6,3 mm de diametro en la toma PHONES.
Utilization de la bandeja de control
Ademas de Ios botones y controles de la unidad
principal ydel controlador remoto, existe un panel
de control replegable en el amplificador.
Para desplegar la bandeja de control
Presione el boton OPEN/CLOSE para desplegar la
bandeja. La bandeja tambien se abrira cuando
presione el boton DOLBY SURROUND o DSP. Sin
embargo, si no realiza ninguna operation durante
unos 10 segundos, la bandeja se replegara
automaticamente.
Para replegar la bandeja de control
Vuelva a presionar el boton OPEN/CLOSE para
replegar la bandeja, o presione esta Iigeramente
hacia adentrol. La bandeja se replegara dentro
del amplificador.
Pour allumer la chaine
Branchez Ie cordon secteur et appuyez sur
POWER.
Pour selectionner une source
Apres avoir allume la chalne, appuyez sur une
des touches de selection de fonction.
La fonction CD ou TAPE est selectionnee et la
lecture commence si vous appuyez sur la touche
de lecture correspondante. La lecture ne peut
cependant pas commencer si aucun CD ou
cassette n’est en place.
Vous pouvez 6galement selectionner la fonction
TUNER en appuyant sur BAND puis sur une des
touches STATION PRESET. La derniere station
de la derniere gamme d’ondes est selectionnee.
Pour ecouter au casque
Branchez un casque avec une fiche standard
6,3 mm sur la prise PHONES.
Utilisation du pupitre de commande
En plus des touches et des commandes de
I’appareil principal et de la telecommande, vous
avez egalement acces a un panneau de
commande retractable sur I’amplificateur.
Pour ouvrir Ie pupitre de commande
Appuyez sur OPEN/CLOSE pour sortir Ie pupitre
de commande. II s’ouvre egalement Iorsque vous
appuyez sur la touche DOLBY SURROUND ou
touche DSP. Cependant, si vous n’actionnez
aucune commande pendant environ 10 secondes,
Ie pupitre se referme automatiquement.
Pour fermer Ie pupitre de commande
Appuyez de nouveau sur OPEN/CLOSE pour
fermer Ie pupitre, ou poussez-le Iegerement. Le
pupitre rentre clans I’amplificateur.
%+
STATION PRESET
\l /
TUNER
o
\/’-~~
o
—v—-/l%
, I,DOWN
Illumination guide
❑
Guia de iluminacion ❑
Assistance Iumineuse ❑
When one of the FUNCTION buttons is pressed,
Cuando presione uno de Ios botones FUNCTION,
Lorsque vous actionnez une touche de fonction,
other buttons light or blink to make the sequence
se encenderan o parpadearan otros botones para
d’autres touches s’allument ou clignotent pour
of steps easy to follow.
facilitar el seguir la secuencia de pasos.
vous guider clans Ies differences manipulations a
Example: Listening to the tuner
effectuer.
Ejemplo: Escucha del sintonizador
When the TUNER button is pressed, the STATION
Cuando presioneel boton TUNER, seencenderan
Exemple: Pour ecouter Ie tuner
PRESET buttons light.
Ios botones STATION PRESET.
Lorsque vous appuyez sur TUNER, Ies touches
STATION PRESET s’allument.
12
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-D939 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-D939 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 29,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info