496472
24
Zoom out
Zoom in
Previous page
1/29
Next page
SETTING THE TIMER
The unit can be turned on at a specified time every day with the
built-in timer.
Preparation
Make sure the clock is set correctly. (See page 6.)
1
Press the TIMER button on the remote control
repeatedly until 5 appears on the dispay, and
press the a SET button within 4 seconds.
5 is displayed, and the hour flashes.
If you press the a SET button after 4 seconds, another
operation may start.
2
Designate the hour of the timer-on time by
pressing the r DOWN or t UP button, and
press the a SET button. Repeat to designate the
minute of the timer-on time.
After you designate the timer-on time, TIMER and one of the
source name flashes alternately on the display for 4 seconds.
3
Within 4 seconds, press one of the function
buttons to select a source.
TIMER and the selected source name flash alternately for 4
seconds. At this time, the selected function button does not
light up.
If this step is not completed within 4 seconds, repeat from
step 1.
If the TUNER button is pressed, the band cannot be selected
in this step.
4
Within 4 seconds, select the duration for the
timer-activated period with the r DOWN or t
UP button.
The duration for the timer-activated period can be set between
5 and 240 minutes in 5-minute steps.
If this step is not completed within 4 seconds, repeat from
step 1.
5
Prepare the source.
To listen to a CD, load the disc to be played first on tray 1.
To listen to a tape, insert the tape into deck 1 or 2.
To listen to the radio, tune in to a station.
6
Press the POWER button to turn the unit off after
adjusting the volume and tone.
5 remains on the display after the power is turned off (timer
standby mode).
When the timer-on time is reached, the unit turns on and
begins play with the selected source.
To check the specified time and source
Press the TIMER button on the remote control. The timer-on
time, the timer-activated period and the selected source name
are displayed for 4 seconds.
To cancel timer standby mode temporarily
Press the TIMER button on the remote control so that 5 or 5REC
disappears on the display.
To restore the timer standby mode, press again to display 5 or
5REC.
Using the unit while the timer is set
You can use the unit normally after setting the timer.
Before turning off the power, repeat step 5 to prepare the source,
and adjust the volume and tone.
Timer playback and timer recording will not begin unless the
power is turned off.
Connected equipment cannot be turned on and off by the built-
in timer of this unit. Use an external timer.
TIMER RECORDING
Timer recording is applicable for TUNER and VIDEO/AUX (with
an external timer) sources only.
Press the TIMER button on the remote control repeatedly
until 5REC appears on the display, and press the a SET
button within 4 seconds.
Carry ouut the steps of SETTING THE TIMER from step 2 and
insert the tape to be recorded into deck 2 after step 5.
TIMER
23
ENGLISH
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-AVF77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-AVF77 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info