496472
19
Zoom out
Zoom in
Previous page
1/29
Next page
En
PROGRAMMED EDIT RECORDING
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
programmed.
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded from the beginning of
either side.
Use the remote control from steps 3 to 8.
1
Insert the tape into deck 2, and press the DOLBY
NR button to turn Dolby NR on or off.
Insert the tape with the side to be recorded on first facing out
from the unit.
2
Press the CD button and load the disc(s).
3
Press the EDIT/CHECK button twice.
EDIT lights up and PRGM flashes on the display.
4
Press the numeric buttons to designate the tape
length.
10 to 99 minutes can be specified.
Example: When using a 60-minute tape, press the 6 and 0
buttons.
5
Press the DIRECT button, then press one of the
numeric buttons 1 to 5 within 3 seconds to select
a disc, and press the numbered buttons to
program a track.
Example: To select the 10th track of disc 2, press DIRECT
button and the numeric button 2, then press the numeric
buttons +10 and 0.
6
Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
7
Press the EDIT/CHECK button to select side B
and program the tracks for side B.
After confirming B on the display, repeat step 5.
8
Press the q REC/REC MUTE button and then
press the d button within 2 seconds to start
recording.
The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and recording
starts. When recording on the front side (A) ends, recording
on the back side (B) starts.
To stop recording
Press the s button. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press the EDIT/CHECK button to select side
A or B, and press the f or g button repeatedly.
To change the program of each side
Press the EDIT/CHECK button to select side A or B, and press
the s CLEAR button to clear the program of the selected side.
Then program tracks again.
To clear the edit program
Press the s CLEAR button twice so that EDIT disappears on
the display.
Recording is inhibited if the erasure prevention tab on either
side of the tape is broken off.
The edit function cannot be used with discs containing 31 tracks
or more.
RECORDING
ENGLISH
18
Tape length
Maximum recording
time for side A
Tape side A (front side)
Remaining time
of side A
Total number of
programmed tracks
Programmed
tracks
Tape side B (reverse side)
Track number
Program number
Programmed track numbers
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-AVF77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-AVF77 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info