496525
14
Zoom out
Zoom in
Previous page
1/56
Next page
14
ENGLISH
PROGRAMMED EDIT RECORDING
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape.
1
Insert the tape into deck 1, and wind up to the
beginning of the front side.
Press Z to open the cassette holder and insert the tape
with the side to be recorded on first facing out from the unit.
Wind up the tape with f.
2
Press CD and load the disc(s).
3
Press CD EDIT/CHECK twice while pressing
SHIFT on the remote control.
EDIT and PRGM are displayed.
When AI is displayed, press CD EDIT/CHECK while
pressing SHIFT again.
4
Press numbered buttons 0-9 on the remote
control to designate the tape length.
10 to 99 minutes can be specified.
f and g are also available to designate the tape length.
5
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered buttons 0-9 and + 10 on
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and 0.
6
Repeat step 5 for the rest of the tracks for side
A.
A track whose playing time is longer than the remaining time
cannot be programmed.
7
Press CD EDIT/CHECK while pressing SHIFT on
the remote control to select side B and program
the tracks for side B.
After confirming B on the display, repeat step 5.
8
Press CD EDIT/CHECK while pressing SHIFT on
the remote control to select side A and press w
to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the end of tape is reached, deck 1
enters the recording stop mode. After entering the recording
stop mode, go to step 9.
9
Press CD EDIT/CHECK while pressing SHIFT on
the remote control for recording of the second
side.
B is displayed.
10
Turn over the tape in deck 1 and press w to start
recording.
Recording starts.
To stop recording
Press Z on deck 1. Recording and CD play stop
simultaneously.
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK while pressing SHIFT
on the remote control to select side A or B, and press f or
g repeatedly.
To change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B, and press s CLEAR to clear the
program on the selected side. Then program tracks again.
To clear the edit program
Press s CLEAR twice so that EDIT disappears on the display.
Up to 30 tracks can be programmed from any of the inserted
discs.
•“FULL is displayed if you attempt to program more than 30
tracks.
Maximum recording
time for side A
Tape side A (front side)
Tape length
Remaining time on side A
Programmed tracks
Program number
Selected track number
Tape side B (reverse side)
Program number
Programmed
track numbers
Tape side
Track number
Disc number
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-AJ14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-AJ14 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info