496503
21
Zoom out
Zoom in
Previous page
1/68
Next page
OTHER CONNECTIONS
OUT
Refer to the operating instructions of the connected equipment
for details.
c The connecting cords are not supplied. Obtain the necessary
connecting cords.
s Consult your local Aiwa dealer for optional equipment.
VIDEO/AIJX JACKS, MD JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the
Rjack, and the white plug to the L jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
This unit can output analog sound signal through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
with LINE
IN (analog input) jacks.
Em
Do not connect an equipment to the LINE OUT terminals and
VIDEO/AUX terminals simultaneously. Otherwise, noise is
generated and malfunction occurs.
CD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being used
Attach the supplied dust cap.
SUPER WOOFERS ~ JACKS
,—--—_—
To play equipment connected to the VIDEO/AUX or MD jacks
proceed as follows,
1
2
Press VIDEO/AUX or MD.
When a equipment connected to the VIDEO/AUX jacks is
played: press VIDEO/AUX.
When a equipment connected to the MD jacks is played:
press MD,
Play the connected equipment.
To change a source name in the display
When VIDEO/AUX is pressed, ‘(VIDEO” is displayed initially. It
can be changed to “AUX or “TV”.
With the power on, press
POWER while pressing VIDEO/ALfX.
Repeat the procedure to select one of the names.
To adjust the sound level of the external
source
When the sound level of the external source is much higher or
much lower than that of other function sources, adjust it as follows.
1 Press
VIDEO/AUX or MD and play the equipment.
2 Press 4+ or ›~ so that the sound level becomes the same
as that of other function sources.
B%%H
During recording, the sound level can not be adjusted.
Connect optional powered sub woofers with built-in-amplifiers
to the jacks.
ENGLISH 20
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-A508 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-A508 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 13,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info