496502
13
Zoom out
Zoom in
Previous page
1/68
Next page
This section explains how to record from the tuner, CD player, or
external equipment.
“--*1
Preparation
Use Type I (normal) tapes only.
Set the tape to the point where recording will start.
Note that recording is done on only one side of the tape.
1
2
3
Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
L
- A EJECT
Press function (CD, TUNER, VIDEOIAUX or MD)
and prepare the source to be recorded.
To record from a CD, press CD and load the disc(s).
To record from a radio broadcast, press TUNER and tune
in to a station.
To record from a connected source,
press VIDEO/AUX or
MD.
Press REC/REC MUTE to start recording.
When the selected function is CD, playback and recording
start simultaneously.
When recording from a connected source, start playback of
the source.
To stop recording, press W.
To pause recording, press II. (Applicable when the source is
TUNER, VIDEO/AUX or MD) Toresume recording,press itagain.
Sound adjustment during recording
The output volume and tone (except BBE) of the speakers or
headphones are freely varied without affecting the level of the
recording.
, ~ ... “. ,.,, .,- . ..=....,. ,;, ; ,,, . . . . . . . . ,, ”.,., ,.
INSERTING BLANK ‘SPACES
M
,8;,,
Insertion of 4-second blank spaces enables you to activate the L .;,,
!$
Music Sensor function. (Applicable when the source is TUNER, &@~
VIDEO/AUX or MD.)
,=*: ;.
1 Press REC/REC MUTE during recording or while in
?#
recording pause mode.
/,?
~
on the display flashes for 4 seconds and 4-second blank ‘~”
space is made. Then, the deck enters the recording pause +
mode.
2
Press II to resume recording.
*I,
;*j
To insert a blank s~ace of less than 4 seconds,
press @
:~qjj
REC/REC MU-rE again while w is flashing.
~
,:.p .-$.,
To
insert blank spaces of more than 4 seca~, after the deck $. ,“?
enters recording pause mode, press 0 REC/’REC MUTE again.
‘:#;
Each time the button is pressed, a 4-second blank space is added.
*
About cassette tapes
To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
e
e?!!.
,
.L($ii=
Side A-
Tab for side A
Ilk
To record cm the tape again, cover the tab openings with
adhesive tape, etc.
120-minuteor longer tapes are (extremely thin and easily
deformed cw damaged. They are not recclmmended.
Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
$$
) ;=~-
/
\a fz
(?
(
To
erase a recording
Make sure the microphone is not connected to this unit.
1 Insert the tape to be erased into deck 2 and press TAPE DECK
1/2 to display “TP 2“.
2 Set the tape to the point where the erasure is to be started.
3 Press
RIEC/REC MUTE to start the erasure.
ENGLISH I ~
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-A505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-A505 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 12,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info