496490
15
Zoom out
Zoom in
Previous page
1/64
Next page
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape,
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded on from the beginning of
either side.
1
2
3
4
5
Insert the tape into deck 2,
Insert the tape with the side to be recorded on first facing out
from the unit.
Pr{?SsCD and load the disc(s).
Press CD EDIT/CHECK twice while pressing
SHIFT on the remote control.
“EDIT” and “PRGM” are displayed.
When ‘[AI” is displayed, press CD EDIT/CHECK while
pressing SHIFT again,
Press numbered buttons on the remote control
to designate the tape length.
10 ‘to 99 minutes can be specified,
The +, - or MULTI JOG are also available to designate
the tape length.
Tape side A (front side)
Tape length
Maximum recording
time for side A
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered buttons O-9 and + 10 on
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and O.
Selected track number
Programmed tracks
6
7
8
9
Repeat step 5 for the Irest of the tracks for side ~‘,
A.
!l
!,,
‘,,‘,
A track whose playing time is longer than the remaining time
,gfi
cannot be programmed.
::m~fji
t
$:
&
Press CD EDIT/CHECK while pressing SHIFT on ‘$”~~
the remote control to select side B and program .
the tracks for side B.
After confirming “B” on ‘the display, repeat step 5.
Tape side B (reverse (side)
Press CD EDIT/CHECK while pressing SHIFT on
the remote control to select side A and press 0
REC/REC MUTE to start recording.
The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and recording
starts. When the last track programmed for side A is finished,
deck 2 enters the recording stop mode. After entering the
recording stop mode, go to step 9.
Press CD EDIT/CHECl< while pressing SHIFT on
the remote control for recording of the second
side.
“B” is displayed.
10 Turn over the tape in deck 2 and press @ REC/
REC MUTE to start recording,
Recording starts,
To stop recording
Press
, Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press CD EDIT/ICHECK while pressing SHIFT
on thq remote control to select side A or B, and press 4 or
* repeatedly.
Programmed
track numbers Track number
Disc number
Tape side
Program number
To change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B, and press
CLEAR to clear the
program on the selected side. Then program tracks again.
To clear the edit program
Press W CLEAR twice so that “EDIT” disappears on the display
m
Up to 30 tracks can be programmed from any of the inserted
discs.
“FUL~ is displayed if you attelmpt to program more than 30
tracks.
Program number
Remaining time on side A
ENGLISH 1~
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-A223 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-A223 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info