496488
15
Zoom out
Zoom in
Previous page
1/64
Next page
PROGRAMMED EDIT RECORDING
2
8,1;
*,W
1,10
3,7,8,9
5
4,5
3,7,8,9
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
programmed.
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded from the beginning of
either side.
1
2
3
4
5
Insert the tape into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
Press the CD button and load the disc(s).
Press the EDIT/CHECK button twice while
pressing the SHIFT button on the remote control.
“AI EDIT” is surrounded by red and PRGM is displayed.
Press the numbered buttons on the remote
control to designate the tape length.
10 to 99 minutes can be specified.
Tape length
.
Maximum recording
time for side A
Tape side A (front side)
6 Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot-be programmed.
7
Press the EDIT/CHECK button while pressing the
SHIFT button on the remote control to select side
B and program the tracks for side B.
After confirming B on the display, repeat step 5.
Tape side B (reverse side)
8
9
Press the EDIT/CHECK button while pressing the
SHIFT button to select side A and press the
REC button to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the last truck programmed for side A,
deck 2 enters the recording stop mode. After entering the
recording stop mode, go to step 9.
Press the EDIT/C14ECK while pressing the SHIFT
button on the remote control for recording of
the second side.
B is displayed.
10
Turn over the tape in dleck 2 and press the
REC button to start recording.
Recording starts.
To stop recording
Press the
button. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press the EDIT/CHECK button while pressing
the SHIFT button on the remote control to select side A or B, and
press the 44 or
- button repeatedly.
Program
Disc
Programmed track
number
number
numbers
Tape side
Track number
To change the program of each side
Press the-EDIT/CHECK button while ~ressinq the SHIFT button
Press the one of the DISC DIRECT PLAY buttons
to select a disc.
Then, press the numbered buttons and the + 10
button on the remote control to program a track.
Example: To select the 10th track of disc 2, press the DISC
DIRECT PLAY 2 button, then press the + 10 and Obuttons.
Remaining
time of si~e A
Programmed tracks
0
on the remote control to select side”A or BUand press the
CLEAR button to clear the program of the selected side. Then
program tracks again.
To clear the edit program
Press the 1 button twice so that red line surrounding“Al EDIT”
disappears on the display.
Total number of
programmed tracks
ENGLISH14
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-A22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-A22 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info