496484

Aiwa NSX-A111 Manual

11
Zoom out
Zoom in
Previous page
1/56
Next page
To record selected tracks of the CD
Before pressing ● , program the tracks (see page 9).
3
&,
...—._ .—..-,
Preparation
● Use Type I (normal) tapes only.
● Set the tape to the point where recording will start,
7 Insert the tape to be recorded on into deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit.
■✛✝
2 Press function (CD, TAPE, TUNER or VIDEO/AUX)
and prepare the source to be recorded.
To record from a CD, press CD and load the disc(s).
To record from a tape, press TAPE, Then insert the original
tape into deck 2 and play it.
To record from a radio broadcast, press
TUNER/BAND and
tune in to a station.
3
To record from a connected source, press VIDEO/AUX.
Press ● to start recording.
- is depressed simultaneously,-
When recording from a connected source, start playback of
the source.
When the selected function is CD, playback and recording
start simultaneously.
To stop recording, press WA on deck 1.
To pause recording, press II on deck 1, To resume recording,
press it again.
B
i
“ ‘w
To start recording precisely (except when recording from :!! ~!
a CD)
.x, ~.:c
?&:
Before pressing ● at step 3 above, press II on deck 1. Then, ,;~”
press
● .The deck enters recording pause mode. To restart
recording, press II again.
R#
,~,:
.~
4
To record part of the CD
a
When ● is pressed, recording always starts from the first track.
To start in the middle of a track, play the CD first and press II for ““:,
aCD at the point to start recording from. Then, press
● .The pause $ $
mode for CD is released automatically and recording starts.
,\&?”
,&@$j
##
,
“?%;
About cassette tapes
● To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
Tab for side A
To record on the tape again, cover the tab openings with
adhesive tape, etc.
● 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
● Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
m
Do not press the buttons on deck 2 during recording
Sound adjustment during recording
To erase a recording
The output volume and tone of the speakers or headphones are
1 Insert the tape to be erased into deck 1 and press TAPE.
freely varied without affecting of the recording.
2 Set the tape to the point where the erasure is to be started.
3 Press
● to start the erasure.
ENGLISH
1 I
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-A111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-A111 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info