496477
13
Zoom out
Zoom in
Previous page
1/44
Next page
4
5
6
7
Within 4 seconds, select the duration
for the
timer-activated period with the W DOWN or WI
UP button.
The duration for the timer-activated period can be set between
5 and 240 minutes in 5-minute steps.
If this step is not completed within 4 seconds, repeat from
step 1.
Prepare the source.
To listen to a CD, load the disc to be played first on tray 1.
To listen to a tape, insert the tape into deck 1 or 2.
TO listen to the radio, tune in to a station,
Press the POWER button to turn the unit off after
adjusting the volume and tone.
@
remains on the display after the power is turned off (timer
standby mode).
Get ready for the TAPE function or the timer
recording.
To listen to the tape, press the - button.
To record the source, press the
button on deck 1.
When the timer-on time is reached, the unit turns on and
begins play with the selected source. While the timer is in
operation, the display indication is dimmer than usual.
The timer recording period and tape length
When the length of the tape to be recorded is shorter than the
timer recording period, the
button on deck 1 is released before
the timer is off.
When the tape length is longer than the timer recording period,
the
button is not released. If the is not released for a long
time, the tape in the deck may be damaged. Press the
l=
button to release the
button.
To cancel the timer standby mode temporarily
While pressing the SHIFT button, press the TIMER button so
that @ goes out in the display.
To restore the timer standby mode, press the TIMER button while
pressing the SHIFT button to display ~.
If using the unit after setting the timer
After setting the timer, you can use the unit. After using the unit,
check whether the contents in steps 5 and 6 are set as you wish,
turn off the power and set step 7 if necessary.
.
To change the specified time and function
Repeat all the steps again.
To check the specified contents
While pressing the SHIFT button, press the TIMER button. The
timer-on time is displayed for 4 seconds.
mia
SETTING THE SLEEP TIMER
1
2
u
The unit can be turned off automatically at a specified time.
Use the remote control.
1
Press the SLEEP button while pressing the SHIFT
button.
2 Within 4 seconds, press the ++ or B+ button
to specify the time until the power is turned off.
Each time the button is pressed, the time changes between 5
and 240 minutes in 5-minute steps.
m
Specified time
While the timer is in operation, the display indication is dimmer
than usual.
To check the time remaining until the power is turned off
Press the SLEEP button once while pressing the SHIFT button.
The remaining time is displayed for
4 seconds.
To cancel the sleep timer
Press the SLEEP button twice while pressing the SHIFT button
so that “SLEEP on the display disappears.
. Timer playback and timer recording will not begin unless the
power is turned off.
Connected equipment cannot be turned on and off by the built-
in timer of this unit. Use an external timer.
ENGL/W12
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa NSX-A10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-A10 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info