Manual Aiwa NSX-A10 (page 5 of 44) (English, French, Spanish)

496477

Zoom out

Zoom in

1/44

To stand the AM antenna on a surface

Fix the claw to the slot.

BEFORE OPERATION

b PRESET

:,, ,,, ,,-;

...,.

SHIFT

FUNCTION

To turn the unit on

Press one of the function buttons (TAPE, TUNER, VIDEO/AUX,

CD). The unit is turned on.

At this time, playback of the inserted disc begins, or the previously

tuned station is received (Direct Play Function).

The POWER button is also available to turn the unit on.

The disc compartment may open and close to reset the unit,

when the unit is turned on.

After use

Press the POWER button to turn off the power. The display

changes to the clock.

DEMO (Demonstration) mode

When the AC cord is connected for the first time, the display

window demonstrates the functions of the unit. When the power

is turned on, the DEMO display is overridden by the operation

display.

To cancel DEMO mode

Press the 11 SET button while the power is off. In this time, the

clock on the display appears. (To set the current time, see

“SETTING THE CLOCK on page 11.)

To restore the DEMO mode, press the E PRESET button while

the power is off.

Using the headphones

Flash window

The window on the top of the unit lights up or flashes while the

unit is being powered on,

To turn off the light, press the CD button while pressing the

■ CLEAR button. To turn back on, repeat the above.

To use the SHIFT button on the remote control

Buttons @ have two different functions. One of these functions

is indicated on the button, and the other on the plate above the

button.

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the button

while pressing the SHIFT button.

To use the FUNCTION button on the remote control

The FUNCTION button substitutes for the function buttons (TAPE, ‘--

TUNER, ViDEO/AUX,CD) on the main unit.

Each time the FUNCTION button is pressed, the next function is

selected cyclically.

Inserting batteries into the remote control

Detach the battery cover on the rear of the remote control and

insert two R6 (size AA) batteries.

R6(AA)

When to replace the batteries

The maximum operational distance between the remote control

and the sensor on the main unit should be approximately 5 meters

(16 feet). When this distance decreases, replace the batteries

with new ones.

● If the unit is not going to be used for an extended period of

time, remove the batteries from the remote control to prevent

possible electrolyte leakage.

● The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor inside the display window is exposed to intense light,

such as direct sunlight

- Other remote controls are used nearby (television, etc.)

Connect headphones to the PHONES jacks with a stereo

standard plug (@6.3mm,

‘/4 inch).

No sound is output from the speakers while the headphones are

plugged in,

ENGLISH 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa NSX-A10 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa NSX-A10 Manual

Product: