157666

Aiwa lcx 107 Manual

7
Zoom out
Zoom in
Previous page
1/26
Next page
7
En
Programmed Play
Up to 30 tracks can be programmed from the disc.
1
In stop mode, keep s pressed until “M” flashes
in the display.
2
Press f or g to select a track, then press
s to store it.
To select a track with the remote control
Press the numbered buttons 0-9 and +10.
3
Repeat step 2 to program other tracks.
To return to stop mode in steps 1 to 3, keep s pressed.
4
Press c/a to start play.
To check the program, press f or g in stop mode.
To clear the program, press s once in stop mode so that
“M” disappears in the display.
To change the programmed tracks, clear the program
and repeat all the steps again.
Track number Programmed number
TAPE OPERATION
—Use Type I (normal) tapes only. —
Inserting a Tape
Press Z to open the cassette holder and insert
a tape with the exposed side down and the side to
be played facing out.
Push the cassette holder to close.
Playing a Tape
Press c while the power is off.
The power is turned on and play of the inserted tape begins.
The volume level is displayed during tape operation.
Z– Stops play. The power will be automatically turned
off.
a– Pauses play. To resume play, press again.
f, g- Fast forwards/rewinds. To stop winding, press
Z.
About cassette tapes
•120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
•Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may jam in the mechanism.
Recording
Note that recording is done on only one side of the tape.
1
Insert a tape with the side to be recorded facing
out.
2
Get ready to record from the source.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press TUNER/BAND
and tune to a station.
To record from the connected equipment, press AUX
and start playback.
3
Press w to start recording.
c is pressed simultaneously.
When the selected function is CD, CD play and recording
starts simultaneously.
To record only the selected tracks of a CD
1 Follow steps 1 to 3 of “Programmed Play” to program tracks.
2 Press w.
To stop recording, press Z. To stop CD play, press
s.
To pause recording, press a. To resume recording, press
again.
To erase recording, press w while the power is off.
After recording, press POWER6STANDBY to turn the power off.
LCX-107 (U) Eng 11/21/00, 10:26 AM7
Downloaded from www.Manualslib.com manuals search engine
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa lcx 107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa lcx 107 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info