135593
52
Zoom out
Zoom in
Previous page
1/76
Next page
INDEXSEARCH
%
+
REW/f3 E9/FFWD
mm
b
@
REW/E3 E$/FFWO
r=lr=l
2 3 4 5
2
1 1 2
INDEX
4s?
o
(r
4s$
9
REW/13 E$/FFWU
(6
mm
L?,
FINDING DESIRED LOCATIONS ON TAPE
VHS INDEX SEARCH SYSTEM
At the beginning of every recording, this unit automatically marks an
invisible index signal on the tape. These signals can then be searched
(INDEX SEARCH) to easily find the beginning of any recording. Do this
procedure on the remote control.
Preparation
Press the COUNTER DISPLAY button to display the operating mode
indicator on the TV screen. (See page 38.)
1
2
Set the number of signals over which to pass.
Press the INDEX SEARCH button repeatedly to set a number between
1 and 9.
The current number appears on the TV screen.
Example @: To move forward from the current position in program
3 to the start of program 5, press the button twice,
Example @: To rewind to the start of program 2 from the current
position in program 3, press the button twice.
Select the direction of the search.
E9/F FWD~: To search in the forward direction.
+/REW/@l: To search in the reverse direction.
The unit searches through the tape in the set direction, and playback
begins after the set number of index signals are passed.
Marking index signals manually E
Index signals are automatically inserted at the beginning of all recordings.
They can also be inserted manually (INDEX MARK) throughout a
recording or playback.
During a recording or playback, press the O INDEX MARK button at the
desired location.
“INDEX flashes on the TV screen while an index signal is being inserted
on the tape.
Erasing index signals E
Find the index signal to erase with the INDEX SEARCH operation. When
playback starts, press the O INDEX ERASE button while “INDEX is lit.
“ERASE” appears on the TV screen while the index signal is being
erased on the tape.
For PAL or MESECAM tapes, index signals should be separated by at
least 1 minute of tape (SP mode) or2 minutes (LP mode) so that the unit
can detect them properly.
For NTSC tapes, index signals should be separated by at least 1 minute
of tape (SP mode) or 3 minutes (EP mode) so that the unit can detect
them properly.
During an INDEX SEARCH operation, an index signal may not be
detected if it is extremely close to the point where the search began.
Index signals may not be detected on damaged or worn out tapes.
Index signals may not be detected at the beginning of recordings where
the tape speed is different from the previous program.
Index signals cannot be marked on unrecorded portions of a tape, or
on tapes without an erasure prevention tab.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa hv mx 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa hv mx 1 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 26,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info