496458
15
Zoom out
Zoom in
Previous page
1/116
Next page
ENGLISH
Preparing the remote control
Inserting the batteries
Caution
To prevent damage from leakage or explosion, follow
the descriptions below.
• Insert two supplied R03 (size AAA) batteries with the
0 and 9 marks correctly as illustrated.
• Do not mix old batteries with new ones or different
types of batteries.
• Do not throw the batteries into a fire, apply heat to
them or take them apart.
• Do not carry the batteries with keys or other metallic
objects.
Note
Remove the batteries when they have no more power, or when
you do not use the remote control for a long period of time.
Using the remote control
Point the remote control toward the remote sensor.
Notes
The remote control may not operate when there is an
obstruction between the remote control and the remote
sensor.
Strong ambient light sources such as a fluorescent lamp or
direct sunlight may cause unreliable operation.
Using a TV with the same type of infrared remote control
facing the same direction may cause incorrect operation.
The maximum distance for effective control between the
remote control and the remote sensor is 7 meters. When the
maximum operable distance becomes shorter, replace both
batteries with new ones.
Although you can use the remote control within an angle of
up to 30 degrees in any direction from directly in front of the
remote sensor, we recommend a narrower angle for stable
operation.
Remote
sensor
When a TV is connected with an antenna
cable
When the TV is connected to the UHF/VHF OUT(TV)
connector using a supplied antenna cable, set the channel
selector at the rear to 3 CH or 4 CH, not employed for
broadcasts, and select the same channel on the TV.
(For watching the VCR, set the channel, 3 ch or 4 ch on the
TV for watching the VCR.)
To select a desired TV channel on the TV
Turn the TV on and turn off this VCR.
To see a TV program or video program selected on the
VCR
Turn the TV and VCR on, and press TV/VCR to display
VCR in the display window.
To see a desired TV channel on the TV after playback
Press TV/VCR so that VCR disappears from the display
window.
When a TV is connected with an audio/
video cable
When the TV is connected using the supplied audio/video
cable, turn the TV and VCR on, and select the video input
mode on the TV.
VCR reception setting
When using the VCR, the signal passes from the antenna to
the VCR and then out to the TV. Before you use the VCR, a
video output channel must be set on your TV.
TV/VCR
VHF/UHF
IN (ANT)
OUT (TV)
3
4
CH
30
30
7m
8
CONTINUE
VCR
5m
To AC outlet
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa HV-FX8100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa HV-FX8100 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info