Manual Aiwa hv dh 1 mp (page 22 of 37) (English, German, Dutch, Italian, Spanish)

138377

Zoom out

Zoom in

1/37

Operation with tape

ShowView Programming

ShowView greatly simplifies entering the date,

channel, start and end times of a Timer Recording

by simply entering a ShowView Code. ShowView

Codes are published in most TV guide magazines;

they can vary one to nine numbers in length.

HOWV

IEW is a registered trademark of Gemstar

Development Corporation.

The S

HOWV

IEW system is manufactured under

licence from Gemstar Development Corporation.

Make sure that TV channels have been tuned and

stored in correct SHOWVIEW order.

Insert a video cassette with protection tab into your

VCR.

Press SHOWVIEW.

Press D or E to select the recording type.

ONCE: To record once.

WEEKLY: To record at the same time every week.

DAILY: To record every day (except Saturday and

Sunday) at the same time.

Press the numbered buttons to enter the

ShowView Code of the TV programme that you

wish to record.

If you make a mistake press F then enter the

revised number.

Press OK/ENTER.

If PLEASE CHECK is displayed it means that you

have entered the wrong ShowView number, entered

the ShowView number incorrectly.

If “- -” is displayed, you have to enter the pro-

gramme number of the station, you want to record

from.

Press F or G to select the settings that you wish to

revise. (PR, DATE, TIME, VPS and SP).

Press D or E to enter the correct information.

Press D or E to switch VPS/PDC on or off.

Press G to select the recording speed.

Press D or E to select the desired tape speed (SP,

IP, or LP).

IP mode determines how much tape is left and

switches speed from SP to LP, if necessary, to

complete recording the program.

IP mode is not selected when VPS/PDC is ON.

Check that the timer event details are correct.

If you wish to record from AV 3 IN AUDIO and

VIDEO on the front or from either of the EURO

SCART sockets on the back of VCR, press AV to

select for correct display (AV1, AV2 or AV3).

If you want to make another ShowView recording

repeat stages 2 - 7.

Press i/SETUP twice.

If PLEASE CHECK is displayed, you have entered

incorrect information and will need to re-enter the

data.

Press POWER to switch your VCR power off mode.

TIMER will appear in the video recorder’s display

while your VCR waits to make the recording.

Notes

 Video Programme System (VPS)

The Video Programme System (VPS) ensures that the

TV programmes that you have programmed for timer

recording will be recorded exactly from their beginning

to end, even if the actual broadcasting time differs from

the scheduled time due to delayed start, or if the pro-

gramme is extended beyond its scheduled time. Also, if

a programme is interrupted, for example, if a news flash

is inserted, the recording will also be interrupted auto-

matically and resumed when the programme contin-

ues.

The VPS signal is broadcast by the TV station and this

controls the timer in the video recorder.

VPS should be set ON for all timer recordings from TV

stations broadcasting these signals. It should be set

OFF for all timer recordings from TV stations that are not

broadcasting these signals.

*** The similar system PDC, which is used in the time

being in the Netherlands, can also be used with your

new video recorder.

 If you want to watch a DVD during timer recording,

press TV/VCR on the remote control to select VCR

mode.

ONCE

0~9,

SHOWVIEW

- - - - - - - - -

REC

PR DATE TIME

- - - -

- - - - - - - -~::

ARD 12

11 11 55~::

PR DATE TIME

- - - -

- - - - - - - -~::

ARD

11 11 55~::

ONCE

0~9,

SHOWVIEW

246876543

REC

PR DATE TIME

- - - -

- - - - - - - -~::

ARD 12

11 11 55~::

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa hv dh 1 mp in the language / languages: English, German, Dutch, Italian, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa hv dh 1 mp Manual

Product: