496584
24
Zoom out
Zoom in
Previous page
1/80
Next page
CONNECTING OPTIONAL
EQUIPMENT
LISTENING TO EXTERNAL
SOURCES
CD DIGITAL
(OPTICAL)
VIDEO/AUX
MD
LINE OUT
SUPER
WOOFER
OUT
U,*
Refer to the operating instructions of the connected equipment
To play equipment connected to the VI DEO/AUX jacks or MD
for details.
jacks, proceed as follows.
The connecting cords are not supplied. Obtain the necessary
connecting cords.
Consult your local Aiwa dealer for optional equipment.
VIDEO/AUX, MD JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L
jack,
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
LINE OUT JACKS
7 Press the VIDEOIAUX or MD button.
When a equipment connected to the VIDEO/AUX jacks is
played:
press the VIDEO/AUX button.
When a equipment connected to the MD jacks is played:
press the MD button.
2 Play the connected equipment.
To change a source name in the display
When the VI DEO/AUX button is pressed, VIDEO is displayed
initially. It can be changed to AUX or TV.
With the power on, press the POWER button while pressing the
VIDEO/AUX button.
Repeat the procedure to select one of the names.
This unit can output analog sound signal through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
To adjust the sound level of the external source
When the sound level of the external source is much higher or
with LINE IN (analog input) jacks.
much lower than that of other function sources, adjust it as
m
follows,
1 Press the VIDEO/AUX or MD button and play the equipment.
Do not connect an equipment to the LINE OUT terminals and
2 Press the ++ or
> button so that the sound level becomes
VI DEO/AUX terminals simultaneously. Otherwise, noise is
the same as that of other function sources,
generated and malfunction occurs.
CD DIGITAL OUT (OPTICAL) JACK
w
During recording, the sound level can not be adjusted.
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (digital
amplifier, DAT deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
SUPER WOOFER d JACK
Connect an optional powered sub woofer with a built-in-amplifier
to the jack,
23 ENGLISH
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa CX-NMT90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa CX-NMT90 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 12,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info