496584
17
Zoom out
Zoom in
Previous page
1/80
Next page
PROGRAMMED EDIT
RECORDING
Q
3,7*J”-I ~
5
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
programmed.
The programmed edit recording will not start from a point halfway
in the tape, The tape must be recorded from the beginning of
either side.
1
2
3
4
5
Insert the tape into deck 2, and press the DOLBY
NR button to turn Dolby NR on or off.
Insert the tape with the side to be recorded on first facing out
from the unit.
Press the CD button and load the disc(s).
Press the CD EDIT/CHECK button twice
.
“EDIT and “PRGM” light up on the display.
PRGEOm
When “Al” is displayed, press the CD EDIT/CHECK button
again.
Press the +4 or > button to designate the
tape length.
10 to 99 minutes can be specified,
Maximum recording
Tape length
time for side A
Tape side A (front side)
Press the DISC DIRECT PLAY button, then press
one of the numbered buttons 1 to 3 within 3
seconds on the remote control.
Then, press the numbered buttons and the + 10
button on the remote control to program a track.
Example: To select the 10th track of disc 2, press the DISC
DIRECT PLAY and 2 buttons, then press the + 10 and O
buttons.
6
7
8
Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
Remaining time
of side A
Total number
Programmed
of programmed
tracks
tracks
Press the CD EDIT/CHECK button to select side
B and program the tracks for side B.
After confirming Bon the display, repeat step 5,
Tape side B (reverse side)
Press the O REC/REC MUTE button
recording.
to start
The tape is rewound to the beginning of the front sidle, the
lead segment is played through for 10 seconds, and recording
starts. When recording on the front side (A) ends, recording
on the back side (B) starts.
To stop recording
Press the button. Recording and CD play stop simultaneously,
To
check the order of the programmed track numbers
Before recording, press the CD EDIT/CHECK button to select
side A or B, and press the < or - button repeatedly,
Program number
Track number Programmed
track numbers
To
change the program of each side
Press the CD EDIT/CHECK button to select side A or E3,and
press the
CLEAR button to clear the program of the selected
side. Then program tracks again.
To
clear the edit program
Press the button twice so that “EDIT” disappears on the
display.
Recording is inhibited if the erasure prevention tab on either sicle
of the tape is broken off.
ENGL/SH
1(6
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa CX-NMT90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa CX-NMT90 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 12,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info