496584
14
Zoom out
Zoom in
Previous page
1/80
Next page
BASIC RECORDING
This section explains how to record from the tuner, CD player, or
external equipment.
Preparation
Set the tape to the point where recording will start.
Use Type I (normal) and Type II (high/Cr02) tapes for recording.
1
2
3
4
5
4.
Insert the tape to be recorded on into deck 2.
Insertthe tape withthe sideto be recordedon first facing
out from the unit.
Press the REV MODE button to select the reverse
mode.
To record on one side only, select =.
To record on both sides, select =) or (=).
Press the DOLBY NR button to turn Dolby NR on
or off.
To record with DOLBY NR, turn on no NR.
To record without DOLBY NR, turn off 00 NR.
Press one of the function buttons and prepare
the source to be recorded.
To record from a
CD, press the CD button and load the
disc(s).
To record from a radio broadcast, press the TUNER button
and tune in to a station.
To record from the connected source, press the VIDEO/
AUX or MD button and play.
Press the . REC/REC MUTE button to start
recording.
When the selected function is CD, playback and recording
start simultaneously.
To stop recording, press the button.
To pause recording, press the 11 button. (Applicable when the
source is TUNER, VI DEO/AUX or MD.) To resume recording,
press again.
INSERTING BLANK SPACES
Insertion of 4-second blank spaces enables you to activate the
Music Sensor function. (Applicable when the source is TUNER,
VIDEO/AUX or MD.)
1 Press the REC/REC MUTE button during recording or
while in recording pause mode.
~ on the display flashes
for 4 seconds and the tape runs
without recording. After 4 seconds, the deck enters the
recording pause mode.
2
Press the II button to resume recording.
To insert a blank space of less than 4 seconds,
press the
REC/REC MUTE button again while ~ is flashing.
To insert blank spaces of more than 4 seconds, after the
deck enters recording pause mode, press the
REC/REC
MUTE button again. Each time the button is pressed, a 4-second
blank space is added.
To
erase a recording
Make sure the microphone is not connected to this unit.
1
2
3
4
Insert the tape to be erased into deck 2 and press the TAPE/
DECK 1/2 button to display “TP 2“.
Set the tape to the point where the erasure is to be started.
Set the reverse mode by pressing the REV MODE button,
Press the
REC/REC MUTE button to start the erasure.
I ~ ENGLISH
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa CX-NMT90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa CX-NMT90 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 12,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info