496574
8
Zoom out
Zoom in
Previous page
1/80
Next page
GRAPHIC EQUALIZER DSP SURROUND SYSTEM
..
..
..
r- 1~’—–--=
GEQ
GEQ
This unit provides the following three different equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
CLASSIC: Enriched sound with heavy bass and fine treble
Press one of the GEQ buttons.
ROCIK/ POP / CLASSIC
To cancel the selected mode
Press the selected button again. “GEQ OFF is displayed,
To select with the remote control
Press the GEQ button repeatedly. The GEQ mode is displayed
cyclically as follows.
r
ROCK— POP— CLASSIC— GEQ OFF
(cancel)
1
Using the headphones
Connect headphones to the PHONES jack with a stereo standard
plug (a6.3 mm,
‘/4 inch),
No sound is output from the speakers while the headphones are
plugged in.
When the headphones are plugged in, the SURROUND system
and the DOLBY PRO LOGIC are canceled.
Sound adjustment during recording
The output volume and tone (except BBE) of the speakers or
headphones may be freely varied without affecting the level of
the recording.
SURROUND
——=====+
f--
(
a 0“- -
‘2- r
ac2c2c2
> .-.
g?gg .--MANUAL
,... -..;~ Q QQ
SELECT
--
The DSP (Digital Signal Processor) surround system can recreate
the effect of sounds reflected from walls or ceilings. This system
enhances 3 m of sound presence.
DISCO: Sound presence of a disco
LIVE: Sound presence of a live music performance
HALL: Sound presence of a concert hall
Press one of the SURROUND buttons.
DISCO / LIVE/ HALL
Equalization curves are selected automatically to match the
SURROUND modes and can also be selected or turned off to
suit your preference.
To select with the remote control
Press the SURROUND button repeatedly. The SURROUND
mode is displayed cyclically as follows.
DISCO LIVE HALL SUR OFF
(cancel)
When the music source is monaural
Select LIVE to obtain a simulated stereo effect, When DISCO or
HALL is selected, no sound will be heard from the surround
speakers.
To cancel the selected mode
Press the selected button again. SUR OFF is displayed.
While SURROUND mode is off, no sound is heard from the
surround speakers.
To adjust the volume of the surround speakers
Press the MANUAL SELECT button twice on the remote control.
“SUR is displayed for 2 seconds.
Press the - DOWN or UP
~ button on the remote control within these 2 seconds.
The Dolby Pro Logic surround speakers level is also changed.
(See page 17,)
m
The SURROUND mode is canceled when:
- the MIC or ECHO level is changed.
- the DOLBY PRO LOGIC is turned on.
- the headphones are plugged in.
When playing back a tape recorded with BBE, it is recommended
that BBE be set to off to avoid distorted high frequency sound.
7 ENGLISH
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa CX-NMT50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa CX-NMT50 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 13,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info