Manual Aiwa CX-NMT320 (page 21 of 76) (English, French, Spanish)

496571

Zoom out

Zoom in

1/76

2,4

1,2,3,4

The unit can be turned on at a specified time every day with the

built-in timer.

Preparation

Make sure the clock is set correctly.

Press TIMER repeatedly to display 0, then press

SET within 6 seconds.

is displayed and the hour flashes.

If you press II SET after 6 seconds, another operation may

start.

Designate the hour of the timer-on time by

pressing + DOWN or B UP, then press II

SET.

Repeat to designate the minute of the timer-on

time.

After you designate the timer-on time, one of the source names

flashes on the display.

Press FUNCTION to select a source, then press

II SET.

● If TUNER is selected, the band cannot be selected in this

step.

Select the duration for the timer-activated period ~J,,

with ++ DOWN or - UP, then press 11 SET.

;:gj

The duration for the timer-activated period can be set between #

5 and 240 minutes in 5-minute steps.

Prepare the source.

To listen to a CD, load the CD to be played first on tray 1.

&@l

To listen to a ta~e, insert the tape into deck 1 or 2.

L@&:

To listen to the radio, tune in to a station.

$$$:,

‘iw’

Press POWER to turn the unit off after adju!~ting j~:

the volume and tone.

remains on the display after the power is turned off (timer

standby mode).

When the timer-on time is reached, the unit turns on and

begins play with the selected source.

The volume level is automatically set to 20 when the power is

turned off with the volume level set to 21 or more.

check the specified time and source

Press TIMER, The timer-on time, the selected source name and

the duration for the timer-activated ~eriod are displayed for 4

seconds,

To cancel timer standby mode temporarily

Press TIMER repeatedly until 0 disappears on the display.

To restore the timer standby mode, press

TIMER repeatedly to

display ~.

Using the unit while the timer is set

You can use the unit normally after setting the timer.

Before turning off the power, carry out step 5 to prepare the

source, and adjust the volume and tone.

● Timer playback and timer recording will not begin unless the

power is turned off.

“ Connected equipment cannot be turned on and off by the built-

in timer of this unit. Use an external timer.

‘ MULTI JOG is also available instead of H and FF

Timer recording is applicable for TUNER and VI DEO/AUX (wilh

an external timer) sources only.

Press TIMER repeatedly until O flashes on the display, therr

press II SET within 6 seconds. Carry out the steps of

“SETTING THE TIMER from step 2 and insert the tape to be

recorded on into deck 2 after step 5.

ENGLISH20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa CX-NMT320 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 12,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa CX-NMT320 Manual

Product: