167131
10
Zoom out
Zoom in
Previous page
1/52
Next page
10
OTHER FUNCTIONS
(PUSH-MENU)
(SEEK)(+)/(SEEK)(–)
(SOURCE)
AUX
Using auxiliary equipment
You can listen to equipment (such as a cassette,
MD, or MP3 portable player) connected to the unit.
Refer to the operating instructions for the
corresponding equipment for more detailed
information.
Be sure to remove the inserted CD to prevent
possible damage to the unit before connecting the
equipment.
1 Connect a cassette/MD/MP3 portable player
or other equipment to the unit’s AUX jack
(3.5 mm dia.).
2 Press (SOURCE) repeatedly until “AUX”
appears on the display.
Various settings
To align the sound levels (Source Level
Adjustor)
Volume may vary each time you change the source
mode. In this case, you can align each source
mode’s volume to almost the same level.
1 Select the source mode to be adjusted.
2 Press and hold (SOURCE) until “LEVEL 0”
appears on the display.
3 Turn (PUSH-MENU) to adjust the level.
The volume level is adjustable from –6 to +6 dB
by 1 dB steps.
To change the display and beep tone
settings
You can set the dimmer of the display, and turn on
or off the VU level meter and the beep tone.
Proceed as follows while the unit is turned on.
There are items that cannot be selected if you
operate when the unit is deactivated.
1 Press and hold (PUSH-MENU) until “SET”
appears on the display.
2 Press (SEEK) (+) or (SEEK) (–) to select
“DIM,” “VU” or “BEEP.”
Each time you press (SEEK) (+), the item
changes as follows:
DIM (dimmer) t
VU (VU level meter) t
A.SCRL* t
BEEP (beep tone)
* Auto Scroll, available when source is CD
(page 9)
3 Turn (PUSH-MENU) to change the setting for
the selected item.
To select the type of equipment
connected to the rear panel
You can connect a power amplifier or a sub-woofer
to the AUDIO OUT REAR jacks on the rear of the
unit.
When a power amplifier or a sub-woofer is
connected, select the type of the connected
equipment correctly.
1 While the unit is deactivated (clock or DEMO
is diplayed), press (PUSH-MENU).
2 Turn (PUSH-MENU) to select “REAR” (for a
power amplifier) or “SUB” (for a sub-
woofer).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa cdcx 504mp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa cdcx 504mp in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info