*Flashing Blue LED (TX Mode) on top of device indicates device turned on*
*Flashing Red LED (RX Mode) on top of device indicates device turned on*
*Charging indicator light lights up (Red) during charging*
*Charging indicator light turn off upon full charge*
*Charging indicator light blinks on Low baery*
*Auto shutdown within 10 minutes of inacvity*
Device Walkthrough
- TX Mode (Transmier Mode)
Device Walkthrough
- TX Mode (Transmier Mode)
TX Mode
(Connecng to audio output device)
TOSLINK (S/PDIF)
TX Mode
(Connecng to audio output device)
RCA Audio OUT
TX Mode
(Connecng to audio output device)
3.5mm Audio Jack
TOSLINK (S/PDIF)
RCA Adaptor
3.5mm Audio Jack
1.
2.
3.
Connecng to audio source (Audio output device).
*AudioConnect is able to connect to up to 2 Bluetooth devices
simultaneously in TX Mode*
*If you are not receiving any sound through a TOSLINK connecon, please
make sure that the audio output sengs on your TV, DVR, and other
playback sources are set to “STEREO” or “PCM”. *
*To enable RCA audio output, locate the audio output seng on your TV
with the opons “FIXED” and “VARIABLE”, somemes labeled “SET
MONITOR OUT”, and change this seng to “VARIABLE”. If you sll don’t
hear any sound, look for a seng that controls the TV’s internal speakers
and set it to “OFF”. *
bluetooth earphones
bluetooth speaker
Remove protecve caps.
TOSLINK (S/PDIF Cable)
3.5mm Aux
Cable
RCA
Adaptor
3.5mm Aux
Cable
TX Mode
Pairing First Bluetooth
speaker / headphones
*Blue light flashes slowly upon disconnecon*
*AudioConnect will pair with last paired device automacally*
PAIRINGPAIRED
TX/RX switch in “TX” posion.
Turn AudioConnect ON.
Make sure Bluetooth device is in
pairing mode. (Within 1 Meter)
Press pairing buon.
(Flashing Blue Light)
Pairing successful.
(Non-Flashing Blue Light)
1.
2.
3.
4.
5.
*Red light flashes slowly upon disconnecon*
*AudioConnect would pair with the last paired device upon turning ON*
TX/RX switch in “RX” posion.
Turn AudioConnect ON.
Make sure Bluetooth device is in pairing
mode. (Within 1 Meter)
Press pairing buon. (Flashing Red Light)
Pairing successful. (Non-Flashing Red Light)
1.
2.
3.
4.
5.
*Green light flashes slowly upon disconnecon*
*AudioConnect will pair with last paired device automacally*
*Audio connect can only pair with 1 audio source only.*
*AudioConnect would pair with the last paired device upon turning ON*
Make sure Bluetooth device is in pairing
mode. (Within 1 Meter)
Hold pairing Buon for 5 seconds.
(Flashing Green Light)
Pairing successful. (Non-Flashing Green
Light)
1.
2.
3.
light
blinks
solid
light
PAIRINGPAIRED
light
blinks
solid
light
Aiwa Electronics Int’l Co., Ltd.
Explore more at www.int-aiwa.com
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Aiwa BR412 BK at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Aiwa BR412 BK in the language / languages: English as an attachment in your email.
The manual is 4.42 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.