496609
9
Zoom out
Zoom in
Previous page
1/24
Next page
9
En
SOUND ADJUSTMENTS
Volume
Turn VOLUME (press VOLUME +,- on the remote).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 17 or more, it is
automatically turned down to 16 the next time the unit is turned
on.
To adjust the bass, treble and middle
range level
To adjust the bass level
Turn BASS.
If the sound becomes distorted, lower the level.
To adjust the treble or middle range level
1
Press MODE on the main unit repeatedly so that
TRE/MID” is displayed.
2
Within 6 seconds, press ENTER.
GEQ
TREBLE/MIDDLE
i-BASS
SPECTRUM
SHIFT
SOUND
r
VOLUME
MODE
VOLUME
MULTI JOG
ENTER
t
BASS
3
Turn MULTI JOG to select “MIDDLE” or
TREBLE”, and then press ENTER.
4
Turn TREBLE/MIDDLE on the main unit.
To adjust the bass, treble and middle range level on
the remote
Press SOUND repeatedly so that “BASS”, “MIDDLE” or
TREBLE” is displayed, and then press r or t within
6 seconds.
Each level can be adjust from “–4” to “+4”.
i-Bass
Produces rich and clear low frequency sound besides BASS effect.
1
Press i-Bass to select “I-BASS ON”.
The red indicator on the i-Bass button lights up.
2
Turn BASS to adjust the level from “+1” to “MAX
(+5)”.
To select the frequency range for i-Bass effect
1
Press i-Bass to select “I-BASS ON”.
2
Press MODE repeatedly so that “FREQ” is
displayed, and then press ENTER.
3
Within 6 seconds, turn MULTI JOG to select one
of the three frequency ranges (1, 2 and 3).
After step 3, adjust the i-Bass level by turning BASS if needed.
To cancel i-Bass
Press i-Bass to select “I-BASS OFF”.
Note
When “I-BASS ON” is selected, BASS is deactivated;
therefore, you cannot select “BASS” with SOUND on the
remote. To activate BASS, cancel i-Bass.
Graphic equalizer
Selects a sound equalization curve to match the music type.
Press GEQ repeatedly.
Each press of the button changes the following seven settings:
HEAVY, VOCAL, SALSA, TECHNO, HIP HOP USER and GEQ
OFF.
USER is a customized curve (see “Setting a curve manually”)
To cancel equalization, select “GEQ OFF”.
Setting a curve manually
1
Press GEQ repeatedly to display “USER”.
2
Turn TREBLE/MIDDLE and BASS to adjust the
sound level.
On the remote, press SOUND repeatedly to select
BASS”, “MIDDLE” and “TREBLE”, and then press
r or t to adjust the level.
3
Hold down GEQ for 2 seconds.
4
Within 4 seconds, press ENTER.
•You cannot set the equalization curve when “I-BASS ON
is selected.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa BMZ-K2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa BMZ-K2 in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info