29696
30
Zoom out
Zoom in
Previous page
1/40
Next page
30
GB
Should you encounter a problem with your
system, do the following:
1 Make sure the power cord and speaker
cords are correctly and firmly connected.
2 Find your problem in the troubleshooting
checklist below and take the indicated
corrective action.
If the problem persists after doing all of the
above, consult your nearest Aiwa dealer.
General
The display starts flashing as soon as you
plug in the power cord even though you have
not turned on the system (see step 4 of
“Hooking up the system” (page 7)).
Press DISPLAY twice while the system is off. The
demonstration disappears.
“– –:– –” appears in the display.
A power interruption has occurred. Set the clock
(page 9) and timer settings (page 19) again.
The clock setting/radio presetting/timer is
canceled.
Redo the following:
– “Setting the clock” (page 9)
– “Presetting radio stations” (page 13)
– “Falling asleep to music” and “Waking up to
music” (page 18)
There is no sound.
Press VOLUME + (or turn VOLUME control on
the unit clockwise).
Make sure the headphones are not connected.
Check the speaker connections (page 7).
The system is in pause mode. Press N (or CD
N on the unit) to return to normal play mode.
Personal computer sounds are heard when
functions other than PC are selected (except
for AWP-ZP1).
Set PC Mixing to off.
There is severe hum or noise.
Move the system away from the source of noise.
Connect the system to a different wall outlet.
Install a noise filter (commercially available) to
the mains line.
The timer cannot be set.
Set the clock again (page 9).
The timer does not function.
Activate the timer and
c PLAY” lights up in the
display (page 19).
Check the timer setting and set the correct time
(page 19).
Cancel the Sleep Timer function (page 18).
Make sure the clock is correctly set.
Troubleshooting
Problems and remedies
When the ?/1 indicator flashes
Immediately unplug the power cord and
check the following items.
If your system has a voltage selector, is the
voltage selector set to the correct voltage?
Check the voltage for your region, then
make sure the voltage selector is set
correctly.
Are the + and – speaker cords short-
circuited?
Are you using the supplied speakers?
Is anything blocking the ventilation holes
on the rear of the system?
Check all the above items and fix any
problems found. After ?/1 indicator stops
flashing, reconnect the power cord and turn
on the system. If the indicator still flashes, or
if the cause of the problem cannot be found
even after checking all the above items,
consult your nearest Aiwa dealer.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa AWPZP1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa AWPZP1 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info